petrs

Thank you bigman for reply! I ordered S3 Buffalo High handlebars with S3 Clamps and hope that it will be good : )

I asked my local dealer and he offered me this one: http://www.gasgasmotos.cz/cart_gg/product_S3parts/HA-BUF-B.jpg It's S3 Buffalo High handlebar and looks very similar like Renthal Fatbar. Price is better and I don't have to long wait for it. Do you have some experience with this handlebar? Thanks, Petr

And which one will be better? 4.5 IN TRIALS 5.0 IN TRIALS 5.5 IN TRIALS 6.0 IN TRIALS DOUGIE LAMPKIN KENICHI KUROYAMA And I found that Fatbar make high one: TRIALS 110 Which one is better for handling? Fatbar or 7/8? Which bar risers I should use? I found only this: http://www.splatshop...bar-clamps.html

Hi, I am 6'2" (189cm) and I need some tips for heighten my GG TXT 280 2010. Which handlebar are best for high people? Do this http://www.splatshop.co.uk/s3-adjustable-handlebar-clamps.html helps? Or do you have some another advices? Thank you very much, Petr

I had Sherco 320 4T 2008 for about one year and Husqvarna SM 510 R (supermoto) for about 4 years - it is wheelie machine : )

I think so : )

Hi, sorry for delay but I could not login to this forum, I don't know why. Thank you all for advice. In the end I decided for 2010 model. I bought it yesterday and test it imediately : )) It is my first 2 stroke. Very interesting type of engine, I love it : )

2010 Gas has half price like new one.

Hi, is it big difference between GG 280 TXT 2010 and GG 280 TXT 2013? Because I have very good offer on GG 280 TXT 2010 but I don't know if it is good decision. Thank you, Petr

Check if you have correct level in float chamber.

Thank you for advice. I will try to clean pilot jet and post result.

Hello, my friend have Sherco 3.2 4T 2007 and have problem with carburetor. If turn with throttle quick, engine stop, but if turn slowly, engine works without any problem. Do you have some advice? : ) Needle is on second notch from top and carburetor is cleaned. Thank you very much, Petr.

Thank you for advice! I have 08, but for

Hello, where to buy higher bar mount? I am very stooping on bike because I am 190 cm tall. What type of bar do you use? Thanks, Petr.

Thank you very much for step by step manul : )

Hello, how to order Motoverte magazine outside France? Specifically this. I'm from Czech Republic. Thank you for any advice. Petr.

Thanks, but I found this: http://www.splatshop.co.uk/sherco-3-2-oil-level-window.html : ))

Hello rockyrider, thank you for reply, but I have red silicon and it will not look nicely. Don't you know, if I can put the window out from cover without destroy it?

Hello, does anyone know, how to repair leaking oil level window on Sherco 320 4T 2008? I have special loctite silicon to seal engine block, head, etc. but I don't know, if I can put the window out without destroy it. Or is there any better way to solve this problem? Thank you very much. Best Regards Petr.

No no, I don't mean decompresor. Decompresor is very noisy and only in low RPM. I mean "clicking" from valve. I wont from Husqvarna that I can not hear any "clicking", but if it's normal, I will not solve. Thank you for reply.

Hello, I have Sherco 3.2 4T 2008 for about a month and it's my first trial bike. It is normal that I can hear the clicking of the valves? I checked the valve play on cold engine and on intake was approx. 0,11 - 0,12 and on the exhaust valve was approx. 0,16 - 0,17. I have other 4T like Honda and Husqvarna and I've never heard so loud clicking. Thank you : ) Btw. Can you someone tell me, how to get the valve cover off without having to demount the whole engine?

Ok, thanks for advice, I'll contact Topfun for stiffer spirngs : )

Thanks, I'll write them. But 7,5kg? It is a bit much, no? I have 7,2kg on my supermoto and it's super hard on rear. I think that for trial need about 4 - 5 kg.

Ok, I'll try to find a local manufacturer of custom springs. Thanks for advice. Btw. I'm from Czech Republic.

Hello Copemech, I have about 107kg with gear and helmet. I found this: Spring But I don't know, where I get front stiffer spring :/ Have you any idea? Or do you think that I don't need front stiffer springs? : ) Thanks for any reply.