Jump to content

bondy

Members
 View Profile  See their activity

  • Posts

    1,791

  • Joined

  • Last visited

 Content Type 

Everything posted by bondy
 
 
  1. bondy
    Sorry for got about the hole its like that to make it easy to get the spring in hope you manage it ok should be enough so it springs back.
  2. bondy
    Neil No not a regular thing to change the spring should likes years. only cut a very small amount off. I. Use I spring puller to wind it round the shaft needs to be in the correct position so you can get enough preload. Happy sore knuckles
  3. bondy
    199b gear box and New spare sleeve gear. this is a spare 199B gear cluster not easy to find.
  4. bondy
    I bought 2 last year brand New.
  5. bondy
    This is a crank I had done at my local engineers top job.
  6. bondy

    Fuel Filters

    bondy replied to netley's topic in Bultaco

    As above you don't need a inline filter as you have normally 1 in the tank and 1 in the carburettor why do you need a 3thd.
  7. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    Yes ill come over in my privet jet this Afternoon. thanks for the info I think ill stay with points on the 340 and if I do decide to buy a electronic ignition I will buy the cheaper 1 from over here the ones I get are £100 cheaper.
  8. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    guys your the only 1 i know with this igniton dose the bike perform well with it?
  9. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

  10. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    Its alot cheaper to buy the 1 I have on 2 off my bikes not sure if there any good the ones with there own fly wheel may just stay with what I have
  11. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    Oh on reading the germane introduction It says the woodruff isn't needed? Says it has a cone I don't like the idea off that if I was to buy 1 I think id get mine from the same place has you.
  12. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    guys how dose the flywheel fit on the crank with no woodruff key?
  13. bondy
    I have never had a alpine so have no idea but I should imagine there the same when I say softer springs I mean I just use the old springs not the stiffer Barnet ones.
  14. bondy
    on my 199A the clutch is very light i use the barnet plates but mine as the 6 nuts you can Ajust so can't comment on the pin type. I only use 4 fibre plates also I have softer springs and a longer Arm and the ignition case mode all make for a light clutch.
  15. bondy

    Power Coat Or Paint

    bondy replied to model80's topic in Bultaco

    Wow that must off been some power washer to take the paint off all my bikes are stove enamell never had any paint come off and i use a power washer all the time. end off the day you make your own mind up.
  16. bondy

    Power Coat Or Paint

    bondy replied to model80's topic in Bultaco

    they wasn't powder coated when New.
  17. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    What weight is your flywheel there are different weights on that web site
  18. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    guys are they easy to fit? Dose the lighter fly wheel cause any issues. I mean is It a direct fit? Also do you need a different fly wheel. Puller?
  19. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    just been looking there £30 cheaper i may order 1
  20. bondy
    I've heard a few say this I have 1 on 1 off my bikes with a few lines in it must be when it comes out the mould they look crap any chance off a photo?
  21. bondy

    Electrex Ignition

    bondy replied to scbond2's topic in Bultaco

    Am thinking off putting 1 on my B however I bought the other type from rex count 3 years ago never had any trouble with it left the bike for 6 months fired up straight way I like the Elextrex is just got the 1 coil and cdi in 1 block that bolts to the original bracket. In saying that I have heard. A few say there no good I can't comment as I've never had 1
  22. bondy
    you will have it looking like mine.
  23. bondy

    Mar Motoplat

    bondy replied to pmk's topic in OSSA

    hears my ignition breather pipe the clear pipe right on the front and my wires comming from top rather then the bottom.
  24. bondy

    Mar Motoplat

    bondy replied to pmk's topic in OSSA

    The breather Goss on the front I will put a photo on latter also the ignition wires get moved from the bottom to the top.
  25. bondy
    iv'e seen a few places over hear what make them i was going to put 1 on my bike but desided not to .
 
×
  • Create New...