Jump to content

bondy

Members
 View Profile  See their activity

  • Posts

    1,791

  • Joined

  • Last visited

 Content Type 

Everything posted by bondy
 
 
  1. bondy

    198A Paint Code

    bondy replied to bondy's topic in Bultaco

    Dont beleave that there must off been some kind off paint code.
  2. bondy

    198A Paint Code

    bondy replied to bondy's topic in Bultaco

    Keith thats code is for the 199B 5015 is sky blue not ford electric blue. I want the 198A blue witch is darker in colour ford electric blue is no longer sold now its called ford electric monza blue but can find the code. I could have it the 199B 5015 but not to sure yet the guy showed me the colour cards and a tin off blue he uses alot witch looked qite darker ive got 4 weeks to make my mined up. I would like it the corret colour if any body knows the code cheers bondy
  3. bondy

    198A Paint Code

    bondy posted a topic in Bultaco

    Hello guys ive took my 198A to be painted hes only doing it in 4 weeks so got time to think about what bluevi want it in. Any body know the RAL number for ford eletrice monza blue? I did tell him to do it in the 5015 code witch I had a 199A done some time ago what do you guys think I should do? Cheers bondy.
  4. bondy

    Frame Colour

    bondy replied to bultacoboy's topic in Twinshock

    Hi guys I know this is an old post but I have just took my 198A frame to be painted. ive gone for 5015 RAL I haad a 199A done some time ago in the same just wanted some feed back should I go for ford eletrice monza blue? Dose any off you know thr RAL number? Cheers bondy
  5. bondy

    198A Oil Leak

    bondy replied to bondy's topic in Bultaco

    Hello paul that sounds like a plane.it would be a shame to split it as it runs nice think ill do just what you said cheers mate.
  6. bondy

    198A Oil Leak

    bondy posted a topic in Bultaco

    Hello ive noticed a oil leak on the rear engine mount its coming from the center crank case with out spliting the engine is there any way I can stop it? Its only a verry small weep I dont really want to split it as its a good runing engine ive only noticed it because the engins been sat on the bench for a few weeks why I have the framed painted.
  7. bondy
    Hi mate glad you got it done. Ive just had some new bronze busses pressed in wouldnt atempt it unless you have a press. Am also having some pressed out ready for new paint.good luck mate
  8. bondy
    You dont neeed to use any welding gear mate. Just take your time and you should be ok
  9. bondy
    Just to add if you heat it up enough it should come off easy with out hardely any damage.like above the dust covers are easy to buy.you should be abel to get the bottom race off with out taking the dust cover off I did it once again heat makes it easy to get off I wrapt a rag round the race and with a set off grips clamp it on the race then tap the grips down if its stubbon may take afew stabs but Iit dose work may have to heat up a few times or you may be lucky and get it fist go good luck bondy
  10. bondy
    Hi dunc ive done a few off these they can come off easy or they can be hard think I only ever had 1 that came off in tact anyway I first get 2 big blocks off wood on the bench I then heat the bottom off the dust cover with hair dryer or hot Air gun I rest it inbeween the 2 blocks off wood then with a flat ended chisel or a drif somthing that wont cut into the dust cover.hope this helps bondy
  11. bondy

    Electrice Ignition

    bondy replied to bondy's topic in Bultaco

    Sorry I wouldnt buy a electrex heard to many bad coments
  12. bondy

    Electrice Ignition

    bondy replied to bondy's topic in Bultaco

    Hi guys thanks for the feed back. I did have a difrant 1 some time ago but I sold it it did work well but never got to use thr bike as it needed a rebuild. the spark was was verry fine I was told elctrice ignitions was like this and not to worry.
  13. bondy

    Electrice Ignition

    bondy posted a topic in Bultaco

    Hello guys as anybody used a rex caunt electrice ignition? If so is there any ajustments to be done or is it just a bolt on job?
  14. bondy

    Chain Tenisoner

    bondy replied to bondy's topic in Bultaco

    Hello smelling thanks for that the 1 thats on the 199B dose fit nice. My 198A mortor as been welded plus the other weldin on the other frame so just waiting for S/Arm then of to the paint shop for sand blast and fresh paint. Ill send you photos
  15. bondy

    Chain Tenisoner

    bondy replied to bondy's topic in Bultaco

    Why am on the suject off chain tenisoner. Is the a standard lenth off chain for the 39 11 sprockets?
  16. bondy

    Chain Tenisoner

    bondy replied to bondy's topic in Bultaco

    Cheers Graham ill have a look
  17. bondy

    Chain Tenisoner

    bondy posted a topic in Bultaco

    Hello guys any 1 know what moden chain tenisoner fits the 198A my 199B as a monden 1 on but not sure what its off I wanted the enclosed typ cheers bondy.
  18. bondy
    Hi joe how are the new springs? Ive just fited magical springs and caps to mine and moden seals off smelling look the part havant realy tryed them yet as ive stript the bike again to have the frame painted and a few other jobs
  19. bondy
    Good to hear you finaly finished it martin. Just doing my 198A
  20. bondy

    Mikuni Jet Size

    bondy replied to bondy's topic in Bultaco

    Hello stue cheers mate I got them from inmotion I put a Amal on the 198B runs good with the Amal but thats for my 198A so ive rejeted the mikuni and will try it. Bondy
  21. bondy

    340 Carb Size?

    bondy replied to smelling123's topic in Bultaco

    Hello stue my 199B as a bing carb 84 28mm as patrick says above. The gearing on my 198B is 11T 39T but not sure if its correct.
  22. bondy

    Mikuni Jet Size

    bondy replied to bondy's topic in Bultaco

    Hello stue got the jet sizes from inmtion ive not tryed the bike yet to busy with other stuff
  23. bondy

    Mikuni Jet Size

    bondy replied to bondy's topic in Bultaco

    Hello stue you any idea what size they are? I can give inmotion a call I just though some body would know.
  24. bondy

    Mikuni Jet Size

    bondy replied to bondy's topic in Bultaco

    Hi thaks sorry I didnt put the model off the bike its 2 bikes really both 250s 1 is the 198A the other 198B id off both would be jeted the same?however I have put an Amal carb on the 198A since it runs alot beter but would like to use the mikuni on my 198B.
  25. bondy

    Mikuni Jet Size

    bondy posted a topic in Bultaco

    Hello all any body any idea what the jet sizes and needel should be for the mikuni carb? For the 198A
 
×
  • Create New...