bondy

me again diffrant question the chain gard one in the photo ive noticed this on other bults with plastic garda the rear metal bracket how do you sink it into the plastic? to make it flush?

hi thanks for the photos when i get chance ill send you photo cheers bondy

hi all think ive ask this before not sure top and bottom yok nuts i need a c spanner to tighten them anybody know what size off c spanner ill need? there is a lot on ebay but unsure what size i need. theres one what dose bike rear shocks was thinking that might do the job but dont want to buy it if its the wrong size.

ok guys thanks for your help ill probely see if i can mount the unit its only a simpel switch with a pin on the end its got a hole in it if i remember back in the 80is when i used to have road bikes theres long spring witch hooks throw the hole on the pin then hooks on the break pedal thanks

hi im fiting light to my bultaco 199A i need a resistor so the bulbs dont keep blowing dose anybody know how the resistor wires up to? allso were dose the rear break light switch go? my rear break pedal is on the left with out looking i dont think there is a loop for the unit to fix to sopose i could make somthing its only to fasten the pin from the unit to the pedal so the break light works. also the lighting coil as to wires i do have a switch for handal bars with 5 wires think 3 go to head light i do have a horn but not really botherd about that but would like to have it working somtime the switch dosant have a button fot the horn so ill lefe that for now i know ill probel get aked why i want light well no reason really just want them on just like the idea i know there crap but i think they look good on

i may do im just gonner try the inner bush out me other bike first its weirod because the bearing whent other the inner bush before i put it in. and i didnt do any damage the bearing moves freely in the swing arm the onely other thing i can think off is if the swing arm is slightly bent may be this is why its not going in i think ive just hit the nail on the head there somthing as come to mind when got the swing arms they had the old bushes in. and on the side ive put the new ones in i had problems geting the old one out when i did get it out it was jammed on the spindel the other side was free .and came off easy so i recon its the arm whats bent may be wrong but i really cant think of anything else my other ones i did just slid in nice .and easy whats doing my head in more is ive wasted money so im gonner have to have to take my other ones off .and have them powder coated

hello all as anybody had the rolling needel bush kit off billet parts the batch theve just made? i put some in over a year ago and they was great. for some reason im having problems with the one ive just got ive put one side in spacer needel bearing outer brass bush all was going ok till i tryed to put the iner bush in it wont go in i havant damaged anything and the spacer. and bearing whent on the iner bush before i put them in the swing arm so now im left with a swing arm i cant use. so im going to have to use the ones of me other bike i do have a spare set but they need restoring any ideas?

hi again question about your top yoke pinch bolts how do you tighten them up? because i want my bolts these way but the nuts wont go into the recess think the bolts go the other way round with nut on the out side but it dosnt look as good as the other way. on the lower yokes its ok? allso just going back to my speedo you can have them on the top fork nut what do you think? and if i wanted the speedo on the left side of the engin is there a bracket i can get to mount the speedo to the engin ? oh. and because i can only have the cabel from the rear wheel cabel would be to long to have it on the engin front wheel dosnt have speedo fitting? so looks like top yoke or left fork nut help

hi thanks are the fork seal on the photo easy to fit? there modan ones arnt they? there on ebay but ive allready fitted seal so may be next time

hi thanks are the fork seal on the photo easy to fit? there modan ones arnt they? there on ebay but ive allready fitted seal so may be next time

yes i do have the mount not made my mind up yet you can put them on the fork nut but i think ill have it in the center cheers. oh can you tell me witch is the best way to rout the speedo cabel from rear wheel?i know to rout it throw the loop on the rear witch way do i go from there? last time i tryed it i whent across the bash plate under the magneto case .and up throw the loop the engin wires go . and up to the speedo head only proplem is the cabel keeps poping out from under the magneto case it could easy get stuck on a branch or somthing

oh yes i know were i can get one of theses cheers

i have the loop on the rear i also have a loop on the left magneot side but dont think theres one on the right might be wrong dont no with out looking but im pritty sure there isnt. just geting back to the center nut i do have a normal nut for it but realy want to stop with the origanal ive had the yoks powder coated

i need one off them special spanners can you sen photo and were can i get one from?

hi all im puting speedo on me 199A i no theres to ways you can mount the speedo can any one tell me witch is the best way? allso the speedo cabel is runing from the rear wheel witch way do i rout the cabel last time i tryed it i whent throw the loop on the swing arm across the bash plate. and up throw the loop on the frame but the cabel keeps poping out from under the magnot cover is there a beter way of routing the cabel so this dosnt happen? one more thing is how tight do i tighten the bottom.and top yoke nuts? i know they should be tightend up with a c spanner but havent got one. and dont no what size to get?

ok thanks

ah ah yes but the origanal one it was made from gray form witch had a shap cut out round the edge any ideas were i can get one from?

hi you miss understand i mean the form that gose over the throtel grip to stop you geting blissters

hi all dose anybody no were i can get the form for the throtel grip? huge bultaco use to have them but hasnt had them in stock for a some time. you may be asking why do i want to put one of these on just to make it more orriganalreally i know you can get the donut ones but i do want the gray form one its cut like a zig zag shap any help would be good. bondy

hi the flyweels arnt easy to remove if you havant got the right tool. not sure about the to arm puller but ud be beter of buying a flyweel puller from bultaco uk. and a flyweel holder to take the center nut of these cost about a tenner each money well spent if you plan on keeping the bike. you could try your puller what you have but i couldnt tell you if this would work. back in the day they used to tap it off with a hammer but i dont recamend doing this incase you do damage hope this helps

cheers

hi all im thinking of puting lights on my bultaco 199A are they easy to wire up?