Jump to content

bondy

Members
 View Profile  See their activity

  • Posts

    1,791

  • Joined

  • Last visited

 Content Type 

Everything posted by bondy
 
 
  1. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Think my 199A has 11-42 works well my B has the standard 11-39 altho not tried it yet has its just being restored.
  2. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    This is correct I bet not many do it this way
  3. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    The 2 kits I bought came with the T bracket but in pieces you have to weld the T bit why its on the cylinder hear the holes for the bolt and stud are drilled out ready for 350 or 250 when You buy the kit. To be honest unless your a hard rider going over rocks ect you don't need the extra strength Begs the question why I had them put On
  4. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Yes off course
  5. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Yes I have 1 on my 199A just need the tap welding on however the kit that you buy as to be fitted on the bike why you weld the tab on also all bikes are no the same the bracket has to be twisted and bent into shape to fit each bike but not hard to do.
  6. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Mines on motoplat but I do have a spare FEMA flywheel if I wanted to put a electronic ignition on it. Also I had the tab welded on mine as there was none think my B is 1 off the early ones 82 - 83
  7. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Stops the frame from bending the stock head steady normally crack unless you weld a steel brace on the underside.
  8. bondy

    Bultaco 199b

    bondy replied to chappo's topic in Bultaco

    Needs 1 off these
  9. bondy
    Buy a New 1
  10. bondy
    Wes silencer came looks nice on. My B but got it for my A
  11. bondy
    I noticed there's a spacer needed ill Have To make 1
  12. bondy
    Mine is on order
  13. bondy
    Looking tidy
  14. bondy
    Certainly looks the part thanks for the photo.
  15. bondy
    Hi what bike is the exhaust for? I had same problem I bought a exhaust for my 199A the guy said it was for this model I paid good money and it was the wrong 1there are quit a few different front exhaust witch the bends Are different I managed to get 1 in the end costing even more money.
  16. bondy
    Correct Mr dabstar.
  17. bondy
    Has any 1 bought 1 off The wes silencers yet? Be interesting to know how It works.
  18. bondy
    I did Ask they said they are getting them when I don't know.
  19. bondy
    5 speed final end gear.
  20. bondy
    The gear in my B and the spare gear cluster I have are both 25mm as wood say if the final end shaft is 30mm it would need a bigger sprocket where from I don't know I've had a few Bs never seen 1 I know the spacers can also be different ii guess its because they was running out off parts at the factory and Just Used what they had.
  21. bondy
    Yes I have a spare 5 speed gear cluster I will take a photo latter and upload it.
  22. bondy
    That's easy the only difference is the 5 speed is flat on the rear face the B as a recess on the rear reason for this was to fit the extra gear in.
  23. bondy
    Privet sellers they was the only ones they had sadly.
  24. bondy
    Hello Woody they came from Spain I bought them for some 1 that needed them however I also bought 1 from France for a spare and the complete gear cluster for the B
  25. bondy
    Job well done
 
×
  • Create New...