Jump to content

suzuki250

Members
 View Profile  See their activity

  • Posts

    740

  • Joined

  • Last visited

 Content Type 

Everything posted by suzuki250
 
 
  1. suzuki250
    Wouldn’t it be easier just to fit a rim tape?
  2. suzuki250
    Never had a problem getting a seal, just make sure everything is clean and well lubed The puncture repair seems to be holding even at low pressure
  3. suzuki250
    True! I'll leave it overnight with 5psi
  4. suzuki250
    Just finished it, put a large patch on the rim seal. It currently seems to be holding 40psi quite well at the moment
  5. suzuki250
    I’ve got a slow puncher, it turns out the rim tape has a very small split where a spoke has damaged it! Anyone ever repaired a rim tape with a puncture repair kit?
  6. suzuki250
    how did you get on with the shop?
  7. suzuki250
    Thank you
  8. suzuki250

    Bottom yoke

    suzuki250 replied to bikestat's topic in Fantic

    Yes, you need to use a press.
  9. suzuki250
    What’s the diameter of the MP600 fork stations? Is it 32mm or 1.1/4”
  10. suzuki250
    How much are the Rockshocks?
  11. suzuki250
    it's looking good The only thing I would add is a rear sprocket guard (I saw someone lose some fingers when I was in the schoolboys!)
  12. suzuki250
    Two stroke timing retards as the revs are increased (Opposite to a 4t motor)
  13. suzuki250
    I've used a couple of pairs of NJB, and the seem pretty good
  14. suzuki250
    Looks like its missing gaskets between the manifold faces, or have you used instant gasket?
  15. suzuki250
    Looking at that manifold, I'd suspect an air leak!
  16. suzuki250
    You need deep pockets even for a mild modified bike, and its very time consuming! If you are on a budget a twinshock trials or pre65 that’s already done is your best bet
  17. suzuki250
    That's nothing. I was so skint once, I had to cook my chips in two stroke oil...
  18. suzuki250
    I think a motor vehicle is a fair description
  19. suzuki250
    Very much depends on the price?
  20. suzuki250
    That’s probably more to do with who bored it rather than the piston I never come across a piston that wears out after two trials no matter how cheap!
  21. suzuki250
    I've got one of those 'Gara Trial' tyres that I took off a bike many years ago, I might give it a try the next time I go practicing
  22. suzuki250
    What did pirelli change, was it the compound & block pattern?
  23. suzuki250
  24. suzuki250
    I work in engineering , and qualified to say 'sh!t happens'. That’s why machine mart sells welders
  25. suzuki250
    there's some for sale on Ebay
 
×
  • Create New...