longlegscanbeuseful

This might help, I had the same problem and this worked a treat. http://www.r2wtrials.co.uk/html_files/betacarbsetup.html http://www.trialscentral.com/forums/topic/310-beta-mikuni-billy-traynor/ Also check the fully open position isnt going too far and the pivot pin is straight and smooth. Good luck.

If you have XPmode you could try installing it on the virtual machine. Type "Windows XP Mode" in the start menu search to see if you have it.

Wheel now stripped down, for the record they (2) are 6203. ZZ's were fitted by the previous owner but I'll go for 2RS.

Hi Experts, Does anyone know the bearing sizes/codes for a TR80 rear wheel. Cheers.

Tried to PM you but I think your inbox must be full.

That works but you missed me.

Not working for me either. I didn't see you there, were you just on the conducted sections or did you manage some of the big boys course too.?

Thats bad luck Neil. Have you tried any file recovery software, don't format the card until you have. You might recover some of them. I had a great day too, like you said the weather was best I've known for Scott day for years. I went to Shaw Gutter for the first time and can recommend it. Then on to Tank Trap which had a few cleans from front runners then became very greasy for the mid pack. We then intended to do Surrender but I have never seen so many cars and vans. Couldn't get within 1/2 mile of the bridge so went to straight to Reels Head but Sunter beat us there. Looking forward to the results.

Thanks Steve. First outing went quite well. I entertained the crowd with a face plant in the first section, other than that it was just the front end that I wasn't happy with. I need to dial it in to my slight frame (17st stone in my shreddies and 6'5"). I've changed to 10W oil and put some preload spacers in. Also added some 13mm bar risers. So lets see how we get on this weekend. Back end was great, no grip issues at all and very comfortable between sections. I had to keep reminding myself that I can sit down on this one. Woody, I would interested in seeing some photos of your clutch arm mod. ATF seems to work well in the gearbox, I would just like the clutch to be a bit lighter.

Thanks Woody.

Hi, I've decided to join the twinshock gang and have gone for my teenage favorites. I had several Ossa's as a schoolboy and owned a Gripper back in 1981/2 when it served me well. Trouble is I don't really remember much about the bike and need some help with basic stuff like fuel mix, plugs, gearbox oil etc. Bike is basically ready to ride and hopefully will get its first outing at Oxenlaw on Saturday. I'm looking for an "expert" who can answer my daft questions as and when they arise and offer tips on set up and maintenance. It would also be nice to know how many grippers are being regularly trialed, I haven't seen any in the North East. Thanks, Gary.

Neil, Charge him a fortune to airbrush a smile on his face. GD.