Jump to content

bmseven

Members
  • Posts

    201
  • Joined

  • Last visited

Posts posted by bmseven
 
 
  1. With the bike supported on a paddock stand and the wheel/swing arm hanging the gap should be between the top of your tensioner block and the underside of the swinging arm.

  2. The sport does need riders and definitely does not need people "just playing around in the hills and valleys". We've enough problems.

    All a bit different on the other side of the Pond :closedeyes:

  3. Nope it was there this morning looks like its been withdrawn!

    Item 280859576587 is no longer available

    There is one on Wobbly Wills tough its in Tyne and Wear

  4. Ive seen lots of SY250's mate

    Only saw one SY250 F ( 4 stroke) the other but sold before i had a chance to bid.....

    Search for

    Scorpa 250 fr trials bike :icon_salut: in parts and accessories

    also a few 175's about

  5. Its a strange one then, have you checked the breather hose on the fuel cap, try starting it with the cap off!

    Fuel filter on the petrol cap clean and fuel runs out at a decent rate? Check the pilot jet AGAIN

    Clean the earth on the CDi unit?

    Recently had a chain saw that would run for 10-15 mins or so then refuse to start for a while it was the coil breaking down.

    As you say when its running you cant fault it probably is simple when you find it :wall:

 
×
  • Create New...