| |
-
Anyone got a kick stand to fit a 2007 sherco
-
Hi all, I have a 2007 sherco 300. Do you need to warm the engine up after start before you sellect a gear, because when I started mine then about 1 minute later I selected 2nd gear and it shot off
-
Yes I already know John from off road moto, ( Top bloke) just got back with my new oversized break pedal. Lol
-
Hi all new from Ashington northumberland, just bought a 2007 sherc0 st300 ( that's if it is )
-
Thanks for the replies but I just took it to Off Road Moto near me and they sorted it for me.
-
HI all, my fan isn't kicking in on my 2009 Beta Evo so I think I need a new thermostat. Can I just take the surclip off and pull the thermo or do I have to flush the coolant first.
ps. The fan works as I've wired the sensor wires together to test and the fan works.
-
Cheers and thanks for clearing that up for me.
I thought there must be two kinds of Factory bikes as my Evo has Beta Factory on the engine casing and I see bikes for sale stating-- Beta Evo factory for sale and its not as it hasn't got the extras on.
-
Hi, can anyone tell me the correct name for the Beta Evo Factory light version. The one with red yokes and red hoses and things, and is a bit lighter than the usual Beta factory. If you know what I mean.
I just want to know what to type in for when im looking for one. Thanks
-
Take the kick start off the put it back on inline with the dent on the pipe. simples:):)
-
Hi all, I've posted some pics from todays Tweed Valley Trial, Bamburgh in the Trials Photography section.
Theirs quite a few so you might see yourself.
-
here's a few pics from today at Breda Quarry. (just over 70 pics)
http://s142.photobucket.com/user/scorpio1966/library/Tweed%20Valley%20Trial%20Bamburgh
These were taken by my 15 year old son Brandon, hope you like them
-
Hi all, my son took some pics from the Tweed valley trial at Breda Quarry at Bamburgh. Is this the place to post them if so how do I go about posting them, their is about 70 pics.
Thanks Dave
-
-
Hi all, how much gearbox oil do I put in my 2009 Beta Eco 250.
Thanks Dave
-
Come to think of it, when I got the bike it seemed to be dragging a bit as though the brake was stuck on when I pushed it over to my van. When I got it home I striped it down and cleaned it which involved taking the front and rear wheel off. I cleaned the callipers out and re- fit the back wheel and it seemed a lot smoother. But now after riding it the rear wheel seems not to spin free enough when you spin the wheel off the ground.
So next question is how do I cure it from dragging.
-
sometimes if you press hard down on the lever
-
Hi all, just bought an 09 Beta Evo 250 (mint bike) so I went to Warden Law on Sunday for a bit practice. After about 10 mins a squeaking started & im sure it was from the rear brake, this went on for a while. Then I stopped for a cuppa for 10 or 20 mins. Then got on the bike again and it was fine, then after another 10-15 mins it started again.
Can anyone shed some light on this annoying problem.
Thanks Dave
-
Anyone got the post code for this weekend's trial at Deneacres park near Chester let street.
-
Well got there today and had a bit ride around in between spectating on the sections. The people I met were very friendly and helpful. Also I made myself a member, so I will be back.
-
Hi, has anyone got the postcode to Hope farm Longframlington.
Thanks Dave
-
Well first time on a trials bike went well. I went to Warden Law , got there about 9.15 & had the whole trials area to myself until about 11.00. All in all a can't day and I never fell off . Thinking of joining a trials club now, I've got the bug.
-
Got in from work tonight and tried bleeding it one more time and guess what, it only went and worked. yippee a working back brake, I might get out this weekend.
-
I tried that way of taking the reservoir off and forcing the fluid backwards, but it was the same too much pressure. I will take a look at the master cylinder.
Thanks Dave
-
OK ,so I got a 60ml syringe and filled it with fluid opened the bleed nipple and attached the syringe. I emptied the reservoir and tried to push the fluid through, but the pressure was too much and just a little bit went into the reservoir, and it was very hard to do it. Is this normal ? but anyway it didn't work as the pedal didn't get any harder. Am I doing something wrong.
-
well my frame No. reads like this, UNBS125TRYA003710 can anyone tell me what year and cc the bike is from that.
Thanks Dave
|
|
