[2007 Sherco Manual?]

Is there anywhere online with a manual for a 2007 250 sherco? I need to change fork seals and wouldn't mind a look at a manual before I do it. Thanks

[Radiator]

has anyone had any trouble with the fan couling rubbing through the solder on the radiator? if so how do you stop it from happening

[Gearbox Breather]

i checked it earlier and its definately drawing air in from somewhere. its fine until it gets warm then air bubbles start appearing in the cup. any ideas?

[Gearbox Breather]

cheers copemech. i'll try that

[Gearbox Breather]

i changed the seals today but it's still the same. it only pumps it out when the engine is warm. any ideas?

[Gearbox Breather]

what would cause drops of oil to come out of a 2007 250 sherco gearbox breather apart from too much oil in it. i noticed the fill plug isnt seating great. i plan on ordering one from splatshop tomorrow.

[Forma Boulders?]

anyone any experience with forma boulders? i fancy trying these

http://www.ebay.co.uk/itm/FORMA-2011-BOULDER-TRIALS-QUAD-OFFROAD-BOOTS-BROWN-11-/360435043246?pt=UK_Motorcycle_Boots&hash=item53eb9a4bae

[Clutch For 315]

i changed the plates and took the grooves off the basket and its now spot on once warm. thanks again

[Clutch For 315]

when you cleaned the plates with a dremel did you take it right back to the steel? or just cleaned the groove?

[Clutch For 315]

will let you know how i get on. cheers

[Clutch For 315]

anyone any experience with the apico plates from bvm?

[Clutch For 315]

Thats the answer i was looking for. Cheers

[Clutch For 315]

i cleaned my clutch and it was rideable but still dragging for 3-4 outings but its back to dragging bad again.

[Clutch For 315]

thanks clay. i'm looking to change the full clutch.

[Clutch For 315]

anyone recomend a clutch?

[Clutch For 315]

also i've been using putoline light gear oil. is this ok or would atf be better and how often do you change the oil?

[Clutch For 315]

Whats the best replacement clutch to get for a 315 and where do i get it? Thanks in advance.

[2001 315R Bars]

cheers nelly. i'll let you know how i get on

[2001 315R Bars]

I'm going to try and spin the clamps so they face forward. See how it feels

[Bike Stand]

thats what i got the idea from neil. ive had a look about and most stands are 430mm high. i'll fling one together soon on my lunch break

[Bike Stand]

i work with a welder daily and i thought i would try and incorporate a magnetic tray in to it for any repairs i'm doing

[2001 315R Bars]

do the mounts on the 315r always tilt backwards for the handlebars? and has anyone changed them for lifted spacers?how did use find them? sorry for all the questions lads i am just trying to find a way of easing the strain off my wrists

[Bike Stand]

right lads i'm gonna build my own bike stand and wondered how high they normally are? its for a montesa 315r. cheers in advance