shercoben12

lol

hi guys theres a beta 2000 rev 3 whith really nice black rims on ebay which the seller is breaking my question is will these rims fit my 08 Gas Gas would i maybe need different spacers?(in-between the bearing and swing arm) thanks ben

thanks guys-there will be more to come! my you tube channel views have shot up! thanks - ben

sorry for shaky camera

http://www.youtube.com/watch?feature=endscreen&NR=1&v=vmkKUdhPFts this is just a bit of fun and having a go at editing nowhere near as good as the other videos on here the boy on the 07 gas gas 125 later came off and throttle got stuck which then seized it shame we did not get it on camera! we are all 12 and have only been ridiing for a few months- enjoy

hi thanks laser for that. i am going to get it now - and i will write up a review for others in the same situation:).... once I've had a chance to try it out. the barrel was re done recently. maybe partly because I've been riding a 280 for the last week the 125 seems gutless. it is not too bad but i still would like that little more power;P ben

where can i get a high compression head? and is this simple to fit? what octane fuel do i need? i currently run 98 thanks ben

thanks everyone for the advice where can i get a 200 barrel and piston and would this still be allowed in the trials i go to where the limit for under 16 is 125 would a high compression head insert make much difference thanks ben

hi everyone I've been out on the bike to day and quite a bit recently . but its a 125 is and is so gutless! could someone suggest ways of getting more power- except for a bigger bike! btw its just had a new piston and iam 13 and weigh 50 kg help greatly appreciated thanks,ben

Love it

It's on My plans! It's great that dad rides trials too:P

Cheers jimmy

That's a very nice plane youve got there:) How often do you fy it? My dad has flown countlesshours in cessnas while learning to fly. Hes now a training captain on the boeing 767 and will fly the 787 when it comes to his airline:) Shame I am not aloud to go to work whith him! Ben

Hi all what tyres is Toni on I saw I video of him indoors and there's white marking on his tyres They don't look like michelin xlite Thanks Ben

My clubs website I think is pretty good Just type edmcc in google

Me and a friend were out tonight after school in our woods when he got stuck at the top of a very steep hill! He dropped the bike and slipped back down the hill. But he dropped the bike on the throttle side which dug in. I was at the bottom were we could not Do any thing but watch as we could not climb the hill in timw as it were to slippery. So we're there watching his favorite thing seize up. It took about 6seconds and man did it rev high then it went silent. He was so angry! So I went back and towed him back up our little but long 5mile track through fields back to our house. Very crude idea by me was to use a rope wrapped round the right hand foot peg then tied to the forks which ment every time I accelerated he veered off to left or right (can't remember!) We got it back in the workshop and stripped it down taking the barrel of and exposing The piston and just as we thought it was completely wrecked as was the barrel completely scored as well. So That's.

My dads 1998 270 Gas Gas does this only when cold but once the cases heat up its stops. Must have an air leak somewhere but then the cases expand at the joint in the middle sealing it . when warm

at our club we used puchcards. but now we have a clip board at the end of each section whith each rider number and you put you're score down beside your number works really well and doesn't fall apart when wet

symptoms are knocking under no load -idle for example . hard to start lost a bit of power un responsive gonna take it dealer tomorrow to let them diagnose it. many thanks for the help ben

How much would it be for a dealer to do the big end?

fairy liqiud to clean- any of these would work- http://shop.freestylebikes.co.uk/scripts/prodView.asp?idproduct=12383 http://www.amazon.co.uk/Castrol-Foam-Air-Filter-Oil/dp/B002RX8URS hope this helps ben

hi did a trial on saturday and in-between sections there were lots of ditches and this guy on a 2011 gasser just hit one and flew up high and landed and hopped around a bit and i noticed his suspension was extremely soft but was not bottoming out. how would i go about making my 2008 gas gas whith sachs shock like this?as mine is currently stiff and bouncy is why i keep getting stuck? thanks ben

hi all i ve just been told by my local dealer that my gas gas will either need a new piston kit or big end - not sure which yet i can fit a new piston kit fine but how would i do a big end and how much and where can i get the bearing. a maunual or tips from you guys would be awesome will i need any special tools? will it be expensive? many thanks ben