shercoben12

will i need to order any gaskets or seals?

nice but why are trials trousers so expensive for some lycra- £95! not blaming splatshot but very annoyed about the cost of trials trousers.

hi all i did a trial on saturday it was great... except from my bike towards the end was really unresponsive and had a nasty rattle near the exhaust port /barrel when revved high on the run down back to idle.and was getting really hard to start i got back and cleaned carb and changed gearbox oil etc. not difference what so ever. what do you all think?

Yes that sounds like a good idea:)

This may help - http://<mention of this company is not permitted on Trials Central>/buy/Genuine-Sherco-Sherco-Trials-Exhaust-Silencer/Sherco-Trials-Exhaust-Silencer.htm You can get a guard from splatshop or a carbon effect one from trickbits trials Thanks Ben

i know that i meant like body position -throttle control

thanks guys for the quick and helpful reply he will take the sherco. any tips for finding grip in mud would be great as were still beginners thanks ben:)

Not

How help full Godzilla There both in the same place

hi were going to an extremely wet trial tomorrow and my dad has two bikes -sherco 290 2006 and a 270 gas gas 1998 which should he take? the sherco has an irc tyre with good edges the gas gas was not used for 8 years and the tyres were pumped up to 30 psi so its still quite hard even whith no air but its getting softer as we keep riding it. again has good edges so which would give most grip. there are no rocks just mud the sherco is not very smooth the gasser is easy though please answer soon as trial tommoz thanks ben

Hi all Benn out on my new bike and noticed when you lift the bike of the ground theres quite alot off up and down free play and is qiute clunky What could this be Thanks Ben

how do you change the user name as i now have a gas gas and shercoben12 should be gasgasben12

anyone tried the jitsie ones?

the x light is a softer compound and has thin sidewalls. so its more likely to have a punture.if you're riding fast long trails pump it up to 7-9 psi. 5 psi would be perfect you could even take it down to 3 in the mud hope this helps, ben

Hi all, I've have just bought a 2008 Gas Gas 125 racing.its In mint condition and rides great. Are there any problems whith this year I should look out for. Are the oils that I used in my sherco good for this bike or what would you reccomend.and any general maintenance tips would be great Thanks, Ben

Thanks zippy. )

Hi all, Still quite new to the trials scene:).Just been out on my new bike down to my woods.. It was so wet and slippery on the hills I could not get up them. How can I stop this? Body position? New tyre? Throttle control? Help greatly appreciated Ben

Hi all, I've have just bought a 2008 Gas Gas 125 racing.its In mint condition and rides great. Are there any problems whith this year I should look out for. Are the oils that I used in my sherco good for this bike or what would you reccomend.and any general maintenance tips would be great Thanks, Ben

Just low:)

hi everyone, i am getting some red master cylinder covers today.when i put the new ones on i will also top up the fluid as it is low. will i have to bleed the system if i do any of the above? ben

Ive Found a place that does Dunlop and michelinn tyres quite cheap on eBay Which would be the best in really clayey mud ben

Hi all I've been out on my dads sherco 06 290 and the clutch is so smooth. Then I went on my bike 06 125 and when I use the clutch in medium to high revs the bike shudders and vibrates We both use the same oil (gro) Does anyone know what I could do? Newplates? Thanks ben

Just sent it to splatshop Thanks

hi just bought some mobil 1 semi synthetic oil to mix whith some petrol for my sherco before i mix it. is this the wrong oil for the bike? advice greatly appreciated ben