bobb

Hello, i have a NEB clutch in my bsa trials bike and it is too sharp and agressive. i only use 4 of the 6 spring to make it softer but it is still very sharp and hard to control. I used to lubricate the plates with light gear oil before but after half a trial the clutch starts to stick and wont free complete. Now i run the clutch dry and it doest stick any more but it is very grabby. Did anyone find a trick to make this clutch work for trials ? Different plates or springs or an oil dat doesnt start to stick ? Kind regards Bob

the big bodied reiger wont fit a 4rt

i ran out of fuel last weekend (in a section :() filled the bike up and she started first kick and ran perfect all weekend

Hello, Did anyone tried a reiger rear shock on the 301rr? stock showa is nice and smoot but its heavy. Reiger has fast and low damping and only weighs 1.1kg

well she is still running ok i put thicker oil in it 10w60 motul and a lot less noise a lot of people told me 10w30 is to thin ( that is what honda has in the manual) and causes the bike to run noisy the importer here also told me he never uses 10w30 i guess the oil delivery hole is fine? bike would have been knackerd now if it wasn't?

Hello My 301rr has a knocking noise on low revs. Not sure what it could be but a good mechanic told me it sounds like a worn piston. Bike is a 2020 and it has been used most weekends. Bike has no vibrations and runs great, it doesnt smoke. Anybody had to change their piston on the 301? Could their be other issues with the bike? Main bearings, big end? Or is this not something that goes wrong quickly? Kind regards bob

a mate is on his 3th rear hub now, every time replaced in warranty. So there must be something wrong with those hubs, nothing wrong with beta service. Does enyone know if an other brand rear wheel would fit into a beta ?

Hello, is there a big step in performance between the 300 and the 301 ? from what i have heard the 301 is smoother and softer in low revs ? i now have a beta 300 4t on a bosi exhaust and it has plenty of power in high revs but lacks a bit of low end grunt (used to ride a very powerful bsa B40) kind regards bob

That may well be the case here, i had one of those sprockets on my bike. My bolts were tight, i got the bolts replaced by better quality ones and locknuts when i got the bike. on the new hub i will fit an older style sprocket

Hello, I broke the hub on my beta last week. The 4 mounting points for the sproket broke off. Anyone else had these issues? I bought it of a mate in the UK and used it not that much. I ride the level under expert in Belgium club trials. UK importer will put a new hub in my wheel so no complaints there ! Is there anything i could do to make sure it doesnt happen again ? Kind regards Bob

cleaned the radiator with compressed air a lot of dust came out fan is running did a clubtrial sunday and no more issues no coolant loss and the bike went perfect all day, i think problem was dust in the radiator will check the impellor any way heart they "dissapear " tnx for the tips

Hello, My beta 300 4st (2018) gets hot and spits coolant out of the top of the radiator bike runs fine very powerfull, no funny noises starts very good no idea what's wrong ? i have seen reports of dissapearing impellor blades on the waterpump ? kind regards bob

hello anyone tried those hfs cartridges before in honda forks ? any other mods to improve the forks ? what oil grade you use ? after market springs improve the forks ? kind regards bob

Hello, anyone tried a flywheel weight on a 290 sherco? i had one on my gasgas 250 before , but i think the sherco has more flywheel weight than a gasgas ? not sure i need one on the sherco anyone tried it before ? good or not ? kind regards bob

will take the shock out and have a look bike used to be riden on highest level but it had a different shock then ( TRP shock) the standard shock has not done a lot of work yet maybe something wrong with bearings or link system i have a michelin x light on, bike has not been used for 1.5 years ( prefer my bsa :p)

hello, the rear shock on my sherco seems not that good; had a gasgas before and that shock was better is there something i can do to improve or do i need to buy a better shock ? kind regards bob

Hello, i am looking for good footrests that are strong and open so no mud stays in, wanted the titanium raptors but no longer for sale what could be a good 2nd choise ? kind regards bob

i have one on my cotswold bsa very good tank nice quality

i tried it on a 320 sherco 4 stroke flat out in 4th it just made it

that hill is a lot steeper than it shows in the picture my big bsa only got up once

bloked pilot jet ?

Hi, i have a small leak in the brake pump oil leaks back to the reservoir . i want to remove the pump but thats seems not so straight forward ? looks like i need to remove exhaust and swingarm ? anyone knows tricks to do this easier ? kind regards bob

great little bike !

are those magical springs good ?