[3D made trial parts]

Sherco clutch holding tool

https://www.thingiverse.com/thing:7079191

[Tech Forks Service]

3D tools for this service:

https://www.thingiverse.com/thing:7069032

[3D made trial parts]

Tools for tech forks maintenance 

https://www.thingiverse.com/thing:7069032

[3D made trial parts]

An polyurethane strap for handlebar wires



https://www.thingiverse.com/thing:7060446

[3D made trial parts]

Chain wear test https://www.thingiverse.com/thing:7042065

 

[3D made trial parts]

swing arm bearing greasers:



https://www.thingiverse.com/thing:7039607

[Old style sidi boot straps wanted]

If I put my hands in one, will be easy to draw in 3D and print in PET or polyurethane

[3D made trial parts]

Rear wheel nut slider

https://www.thingiverse.com/thing:6989103

Grips

https://www.thingiverse.com/thing:6980486

Carb dust cap

https://www.thingiverse.com/thing:6965620

Split link case

https://www.thingiverse.com/thing:6957513

Sidestand sock

https://www.thingiverse.com/thing:6948664

Spark plug case

https://www.thingiverse.com/thing:6948546

[Brazilian hills]

No fences endless greenmountains

 

https://www.instagram.com/p/DFBGhKWSX3h/?img_index=7&igsh=MXE1N3N2dnV0dnJvag==

 

 

[3D made trial parts]

Flywheel cover spacer for weight install

https://www.thingiverse.com/thing:6936786

Keychain sherco logo

https://www.thingiverse.com/thing:6933036

Cdi rubber holder

https://www.thingiverse.com/thing:6945068

[3D made trial parts]

Water pump gear (sherco)

https://www.thingiverse.com/thing:6929710

Gaskets

https://www.thingiverse.com/thing:6927491#google_vignette

Brake pads (for brake work and bleeding)

https://www.thingiverse.com/thing:6923693

Throttle cable holder

https://www.thingiverse.com/thing:6921640

[3D made trial parts]

Made an choke lever extender today

https://www.thingiverse.com/thing:6892318

[3D made trial parts]

https://www.thingiverse.com/thing:6855137

[3D made trial parts]

Chin pad

https://www.thingiverse.com/thing:6826144

Seal cleaner

https://www.thingiverse.com/thing:6830708

Tire valve cap

https://www.thingiverse.com/thing:6832848

 

[3D made trial parts]

Spare brake or clutch lever

https://www.thingiverse.com/thing:6768044/edit

[3D made trial parts]

Botton forks protection

https://www.thingiverse.com/thing:6763130

Sherco headstock dust cover

https://www.thingiverse.com/thing:6760027

Master cylinder saver

https://www.thingiverse.com/thing:6763137

[Tech fork 'Cartridge Assembly Tool' 080008000]

Mine is 22 one side and 19 other side....

[Help build a wordwide map for moto trials, Enduro and MX riding clubs, parks and spots]

In Brazil you can ride in any place....

[3D made trial parts]

Chain pad

https://www.thingiverse.com/thing:6749339

Anti-stuck chain
https://www.thingiverse.com/thing:6749348

[Tech fork 'Cartridge Assembly Tool' 080008000]

mine was made by welding a nut on a pipe...after I bored nut internals.

This tool has two ends because aluminium forks and steel forks are diffrent sizes

It is not needed everytime.

If you disassemble with an impact hammer, probably will no need to hold internals

[3D made trial parts]

Trottle wheel

https://www.thingiverse.com/thing:6704127

Gas tank hose breather

https://www.thingiverse.com/thing:6704223

[3D made trial parts]

Triple clamp guards

https://www.thingiverse.com/thing:6703985

[3D made trial parts]

brake hose guide

https://www.thingiverse.com/thing:6703972

[3D made trial parts]

Forks bumpers. Sherco

https://www.thingiverse.com/thing:6703960

[3D made trial parts]

Brake and clutch master cylinder protectors

https://www.thingiverse.com/thing:6698163