Jump to content

cascao

Members
 View Profile  See their activity

  • Posts

    581

  • Joined

  • Last visited

 Content Type 

Everything posted by cascao
 
 
  1. cascao
    Look for best aftersales support.
  2. cascao
    Yes, this is a good practice. Anyway, you should always wash everything after removing swing arm from bike. And, yes, when I wash my bike I never spray high pressure water in links area. This part is always dirt. I try in these videos keep things "real world" and simple as possible. The idea is give confidence to the one who want do the job first time.
  3. cascao
  4. cascao
  5. cascao
  6. cascao
    Good ad. Bikerpet. On aluminium shocks too Splatshop sell these bushings separatelly
  7. cascao
    I've done two videos on trials maintenance Front fork and rear shock.
  8. cascao
  9. cascao
    For newer models the filling bolt is at the level. Fill untill it overflow. Should be ~450ml
  10. cascao
    Same Honda shadow fork seals....
  11. cascao
    Look for best aftersales support!!
  12. cascao
    Probably, 52mm is the lower leg hole diameter and 52,2mm is the seal outer diameter. this 0,2mm is for interference fit.
  13. cascao
    If torx T100 isn't available, be careful with improvisation a new tool since it can damage the finish. Protect it with a rag between tool and part. Probably a big nut will be able to turn this cap. Below the one I've made to formula brakes.
  14. cascao
    ...I'm using fork boots (gaiters). They keep all mud and dust out of seals and give some protection from rocks. https://www.instagram.com/p/BjCt3t2Boo5/?taken-by=leocm74
  15. cascao
    Probably bend shaft. Take a look in this video
  16. cascao
    Something new is on the way http://www.mecatecno.biz/
  17. cascao
    Sherco hold 450cc as manual says. Gasgas sould be close
  18. cascao
    Last weekend I worked in my practice area moving a rock with a farm jack. https://www.instagram.com/p/Bizisx9B8hy/?taken-by=leocm74
  19. cascao
    Take a look at this manual from formula Garfo formula regulagens.pdf
  20. cascao
    See attached file from formula Garfo formula regulagens.pdf
  21. cascao

    Sherco forks

    cascao replied to malcolm's topic in Sherco

    Malcolm, you need to open the top cap and turn forks upside down. On coil side this will drain most of the oil. On dampening side half of the oil will be inside cartridge and it need be disasembled to drain oil.
  22. cascao
    Hope sherco improve their aftersales soon....this is a shame for them.
  23. cascao
    The impeller of my motorcycle had better days...and shipping from france to brasil take too much time. So making one was the obvious choice.
  24. cascao
    Tech forks share same seals as honda vt600 shadow!
  25. cascao
    Found that doing this way (not completly disasembling) old oil will be trapped on hydraulic cartridge. On coil side this can work.
 
×
  • Create New...