[Front brake drum Fantic 200]

Yes that's common. Plenty of people reline then. Look up Bill beverage he did mine.he's on facebook

[GasGas TXT 2018 Idle question]

Normal

[real bike weights]

Don't know about the others I have a gas gas 2017 GP it's 65kg

[Clutch grabbing]

Fasten the lever back to the bar's when your not riding it. Worked for me.

[199A Head Stay??]

If you don't use one you risk bending the top tube I've seen a lot with bent top tubes as a result of broken stays. On mine I've welded a long bolt into the channel where they break to add extra strenth. The 199b has a better head stay when mines stripped down for a repaint I'll be making one the same.

[Cub T20 crank Pin]

Try greystone enterprise. Or alpha bearings

[Alpina M116 Maximum bore size]

Inmotion in the UK list them up to 86mm if that's any help

[Clutch Plates]

In motion have them

[Tales of a clubman- YouTube]

Enjoyed that keep up the good work

[Villiers engines and Aspen fuel]

Been using aspen for about 5 years now mix my own 2t. Just bought 25 litres of fuel from classic fuel solutions no ethanol. Got lead in it like petrol used to be 105 octain. 3 -5 year shelf life. Yet to try it. It's cheaper than aspen.

[My Suzuki DS 185]

Nice work. Looking good like the detail on the rear mud guard fixing

[Exhaust seal]

Look up Trevor Bennett on facebook he was making a ss washer to go on before the o ring to cure this problem. Or make your own 

[Sherpa poor starting and rough running]

I'd bin that carb and go for a mikuni. Give in motion a ring they'll be able to help

[240 Fantic rear tubeless rim]

It's a tyre sealant for mountain bike tubleless tyres. Seals rims and holes in tyre

[240 Fantic rear tubeless rim]

Mines spokes through rim. Get the stans notubes easy fix 

[240 Fantic rear tubeless rim]

Had same problem. Get some stans notubes from a mountain bike shop take the valve core out use a syringe to squirt in about a cupfull. Put valve back blow it up and ride around for a while sorted mine

[Evo Linkage Guard]

Gas gas one goes between sump guard and frame if that helps

[Lockdown spending]

Nice looking bikes.  Have you got hfs setup in the forks if so how do you like them and which one. Cheers

[Bultaco 350 Alpina 213]

Try in motion. Bultaco uk

[Wheel building.]

Just stripped my front wheel down to respoke with stainless and measured my offset at 12.5mm from brake side so it could be 15mm is correct . Mines a 199a. Hope this helps

[Trial Trophy Bilstain, Belgium 5-7-2020]

Where did it all go wrong. What happens to proper trials

[Sherco 290 clutch spares.]

Splat shop have kits for 1999 to 2013. Give Chris a ring

[Cub Clutch woes]

Plates will be ok they can run dry as do Pete's clutch. You won't regret buying one. Fit and forget I don't bother using a gasket as no oil to leak.

[Cub Clutch woes]

Pete Kirby 07886 745942. Nice chap very helpful. Not cheap but quality never is. I've had 3 from him work nice. Think they were about £450.

[Cub Clutch woes]

Get A Pete Kirby belt drive clutch no oil work brilliant. You won't regret it