turbofurball

Yeah, they would be fine to get going on ... I started out with a pair of generic motorbike boots from Lidl (which I got second hand for a fiver), and they worked ok until the soles peeled off

What kind of chest protection? I've never heard of that being required. I've not had any burning problems in my stretch jeans or Hebo trousers, but did when riding in shorts so I've stopped doing that

Best thing is to go meet up with the club to get a look and ask questions ... you don't need fancy gear to get started, and clubs are a good source of used boots and bikes. I started on a 2004 Gasgas 125 and it was a great bike, plenty of people will say a 250 is good to start on but that would have been too much for me. Good luck!

Trials crosstraining on youtube has nice video guides on setting up the bike (including where the back brake should be), and wheelieing. I have an old injury in my right ankle and prefer my brake pedal to be slightly below the footpeg, it hasn't held me back so far but then I'm a rubbish rider For near-stationary lifting of the front wheel, like Pakjeem, I don't cover the brake and just shut the throttle when I panic. Note that 1st gear on a modern larger-capacity gentle-revving bike can be a bit slow for wheelies, 2nd is good, 3rd is easy to loose the bike. It also helps to use a "kicker" (a small rock or tree branch) to begin with. Good luck!

Hello and welcome, is there much trials opportunity in Dubai? The impression I had was that it was more the province of paddle tyres

I'm 5'10, on my TY 175 the pegs are down and back and the bars up ... without those changes yes it would be too small for me! Thing is, it's much lighter than the TY 250 but with the same Yamaha parts availability.

The best option, then, is probably to get any other trial back caliper and get an adapter machined up to make it fit ... time to get creative

I love the way the english content of their website is just the spanish put through google translate 😅

Catalunya is the place for trials and enduro (MX less so), and most clubs will have facilities for kids - though the emphasis is usually on youth trials over smaller children. There's a list of clubs in Gerona province here: www.fcm.cat/web/ca/clubs/17/145

Price is relative, but it seems the UK is catching up with European prices which were generally much higher pre-Brexit. Still, it gets people to maintain their bikes better in the long term, which is a bit of a silver lining

I had a nice jaunt today, thought I'd share some photos ... Left at the fork is lying, after 100m it goes up at a 1/3 gradient with some steps and lots of loose gravel, you have to really commit to it to make the top! Then you can drop down into a valley that's prone to rock slides, which means it's a nice rock garden to trundle over ... And then out the other side for a nice view on the way home

Some notes on this, from someone who is not a very good rider ... I started on a Gasgas TXTPro 125, which was a cracking bike and very reliable for the year I had it (I only had to service it, and sold it in the same condition I bought it). Then I got the itch for a twinshock and got a TY175. Then I spent a LOT of time and money to get the TY to ride somewhat nicely and not weigh quite so much. Now I have a 1999 Sherco 250 "modern" bike that was well kept by previous owners, and it's just lovely to ride. It's road registered and was very cheap. I've spent about 6 hours on it this weekend, meanwhile I need to get around to an engine rebuild on the TY and getting the wheels rebuilt, and other things. I love the TY, but I ride the Sherco.

Well, I haven't got any further with this so no worries on lateness That sounds like a smart solution to make it more "factory" ... we're out of fire season now so having a perch has been back on my mind this weekend after a couple of longer rides

They're stiff when new - I went out in the wet, and afterwards used lots of dubbin and wore them about the house a bit, and that broke mine in nicely.

I can see why you want to keep that Matchless "for best"!

Welcome, that's a thorough collection you've got! Do you have any photos?

Actually, thinking about it I have some Stihl premix kicking around, and that doesn't go off. It's 50:1 mix, maybe I could try that in the old bikes when they're going to be laid up for the winter (and if they don't like it much I can drain it and use it in the chainsaw, lol)

I've lost the contact details, but with paperwork from the right person it's not horribly hard - just photos, signed bill of sale from the previous owner, and the right forms filled out.

Just to chip in, I use forecourt 98 octane E5 fuel because I don't have anything with a fibreglass tank. I've experienced gumming in the carbs of bikes used occasionally with 95/E10, and a noticeable drop in performance when it gets old, the E5 seems to be ok. It's one of the reasons I decided to get a cheap new trail bike than looking for nice old one - designed for E10 throughout.

He's very thorough ... just not very fast

That was four years ago 😅 I've since made several cables using Venhill kits (using electrical soldering iron and non-flux-cored solder as recommended by B40RT) and haven't had one fail yet. The highest strain being the clutch cable on my 650 Kawasaki, which has done about 20000 miles since.

There was a drain hole fitted, without it the airbox fills with water any time it's splashed up and there's no way for it to get out. If you look for photos I'm sure it's easy to add one yourself. The reason I said about the rebuild kit is because it replaces all the little squishy bits including o-rings that often go off with age and cause air leaks, the Dellorto carb has more of those than other trials carbs I've fiddled with (admittedly not many), but maybe it does only need a clean

Make sure your airbox has been modified to the 2004 spec if you're planning on playing in water. My TXTPro ran like crap when I got it, a carb rebuild kit (just over 10 quid at the time) and untrasonic clean and it started and ran great right through after I sold the bike Edit: Oh yeah, also welcome!

Wow, I wonder what their reasoning for that is 😕

I'd recommend using some bar risers to try on different heights and find what's comfortable. My Cota has 1" risers, my TY about 3/4" on a custom top clamp, and my Sherco is stock (plus my enduro bike is higher than stock with risers, and none of my road bikes have stock bars on them because I'm not built like an average Asian person), it really depends on whats comfy for you.