| |
-
Typical yarkshireman
That is to strip a wheel a rebuild it again, bet you cannot do it in less than 2 hours, neither can we......properly. And we do 'em, well Hutch is in charge of the patience for them.
I had a pair rebuilt for me a few years ago by someone else, cost me
-
-
Got one ta, just for the job Dabster
There is also a knack to building a DID properly too....
-
Good job, nice to see something different and the sy really suits a paintjob . Here is a pic of one of my oldies......
-
ALL plastics can be painted, but it is not always done properly. But i know a man who can do it for you and who has done lots of trials bikes plastics , a few pics can be found here on an old and in desperate need of an updated website....(edited as i dont think that it is allowed to post links anymore??)
PM me if you need help.
-
There was a temporary issue as the server was doing maintainance, but is all back online
-
Ham2 err, not sure found it ages ago on the webble somewhere...thought that it was right up my street
-
They must be two completely different bikes as they have different names !!
-
Yup, tis fine for me addict, but you would need 3 times that size to make a bashplate, plus 90% folks would not pay the money for the material cost let alone the bashplate, reckon you are like me in the minority then. Just look at the cost for the titanium future trial links,
-
We bought some titanium plate to make some custom footrest hangers and the plate was only 4mm thick, was about 8" sq and that little 'offcut' cost us
-
Just found the pic on the web of Dabsters bike which is to be in the official press release....
-
Wonder if the greeves is full of japanese bits also
-
Is it not on the RAW sports 80's website then, as it dont look like it has been updated for a bit. Where is the 09 stuff, is it online?
-
I know that the 'kids' think that drain pipes are back in but i reckon that you cannot go far wrong with a pair of flares. Clear the boots a treat too
-
-
yup it's on & doug currently leading !
-
Any idea on the Lego rip off for advertising the indoor yet then, no sections in lego or a mini me lego doug?
-
My response to all concerning the strange drive 'em out before they start attitude to Xispa is a simple
What has gone on is not fair and certainly not in the previous spirit of TC , and no i have not got any connection whatso ever with the bike or importer i just feel sad that people have been ' got to ' over this and.....aww whats the point?
-
Hey PP limp wrist, everything was loose on your 315!!! No wonder it rattled
-
Not with your fat a*** on it trying to ride 'through' the rocks
-
i see that you have had 244 views and no reply which is a shame. There are a lot of cross over parts , in fact most of the stuff that basically aint the engine and associated parts are all identicle between the 315 & 4rt. Also basically the newer the 315 the more the x-over stuff is the same for stuff like hubs etc.....
-
Oh i don't know, Skint ain't that far out. my mates cat is called Splat!!
Ps. Like it Ham2
-
Erm, if i had seen one i am sure that would have done, or at least had a wild stab at it
-
Mmm the post with the actual email address seems to have disappeared? Someone at work again, are they not allowed to post the contact address if asked for by Joe Blogs ?
-
I thought that you had been signed up into their ranks Perce?
Mmm , funny he has a Honda too
|
|
