edgas250

Any results about yet??

well done! hope the weather stays good for you! im hoping to go around a few sections to watch on the mountain bike, are there 3 that are pretty close to each other which i can watch?

Is the Lomax trial on this monday? anyone doing it?

its showing on eurosport 2 tomorrow night (thursday) at 7pm

its gone into repair he seems to think its something to do with the clutch or transmission which im not sure is better or worse than little ends!

Thanks for that im sending it into a local bike shop tomorrow, and get them to sort the lot out! i havn't got time at the moment to be bothering doing it myself! How much would i be looking at paying for main or little bearings fitted? Thanks

My life with my scorpa has nto had the best of starts, now more problems, I took my bike out tonight after work, so strapped it in the van this morning, then when i got to it tonight, there was oil on the floor and has been seaping out of one of the fork seals! has this blown the shock? or just the seal? Second i have a tapping coming from what sounds like the top end of the engine, the noise is kind of like a drill on hammer setting if that makes sence? And i know the scorpas have a whine but usually in second/third it will have a big whine then go if reving the bike I know theres alot to take in there but any help would be appreciated, Thanks Matt

ok thanks, do you know what they're torqued up too?

rite finally got around to drilling the bolts out, came out no porblem (more luck than judgement!) Should the bolts jut be nipped up or torq wrenched? thanks

ok, thanks im actually a member of the club, but i've ordered a 106 link regina chain from trials uk cant seem to find a name on my original one. Thanks for the info! Matt

Thanks for the reply, im in the shropshire area, im going to ring a few places now to see if the have any, are all 520 chains the same as in the make, renthal/iris/regina?

i have sent him an email, the log book says 4 prev owners. so im guessing he's going to say it was previous owner, as for the chain i need it extending not shorting, cheers

bought an 06 sy250 2 weeks ago and just noticed there are 2 yoke bolts snapped! 1 on top yoke and 1 on the bottom, and the prev owner has put silicon in between the crack! i couldn't beleive it, ill never by a bike on ebay again! How do i go about getting the end out, could i do it with the forks still on or would i need to remove them? Also i have bought a new rear sprocket 42tooth, originally it had a 37tooth, now the chain wont fit, can you buy small lenghts of chain? or would i need to buy a bigger chain? Thanks in advance people!

Wern ddu is a farm which has every type of terrain you could ask for! streams, moorlands, muddy hill climbs, rocks and for

haha, dont get me wrong i like bou, but its getting abit like michael schumacher in f1!

was a good event, but was it just me or was anyone else wishing raga cleaned the last section and bou 5'd it

was the fuel left on for 2 weeks?

where in the nw are you from, theres alvanley trial grounds nr ellesmere port, or abit further into north wales is wern ddu, corwen.

Last weekend i broke my metacarpal after dropping the clutch on my scorpa, which took me and the bike into a tree, myself taking the biggest hit, so know i will live the rest of my life with only 3 knuckles on my left hand

Just seen these on ebay, anyone used them? http://cgi.ebay.co.uk/STAINLESS-ALLEN-BOLT...A1%7C240%3A1318 Just wanted some reviews weather or not to buy or not, cheers matt

Just been out on my first ride on my 06 sy and its horrible to ride, firstly the suspension is very hard on the front, this may sound dumb but which way do i turn the knob on top of the suspension to soften it? clockwise or anti?? next the clutch lever doesnt return to the handlebar and the clutch action just feels notchy so any help on setting this up would be appreciated thanks

thanks for the replies, ive just ordered some galfer ones from r & t,

the brakes on my sy250 06 are pretty pants, pads have probably 2mm left on them, so i was going to replace these and bleed the system fully, there are so many pads about on ebay and in online shops i want to know what the best reasonably priced pair around are, thanks in advance matt

it should go in no problem, i have a swb and 2 bikes will go in diagonal no problem still room left behind passenger seat and back doors for 2 peoples kit!

all done now, thanks to the good old heat gun! next problem is wheel bearings, i ve only gone and hammered too hard and blown the one out leaving the outer shim in doh!