| |
-
Take it back! Me and my mate both have '04 250 Pro's and ours don't crunch.
-
Atf dextron3 works well,you can get 5litres for about
-
Hi,there's a black one on Evil bay at the moment
-
Got the repair done,drilled the frame and tapped the hole out m8,then drilled the bush out m8 and welded a bolt in.......job done.Thanks for your replies.Chris
-
Get yourself to a bearing stockist with the pedal and pin,ask for either a "du" type bush or an oilite type,if i remember right, a DU should be a good choice
-
Do check the kickstart pinch bolts are tight,and DON'T jab the starter when kickin it off........i found out the hard way.....
-
Cheers Perce,thats the line of thought we had,just gonna strip the back end off today,then i can have a good look at the beasty.
-
Hi,i've got an '04 250 pro.anyone out there broken a pedal off the frame.....and if so how did you repair it?
-
It's even more sexy in the flesh! Sammy had one at the dirtbike show,my in-law was quite taken by it.
-
Hi,i've not long swapped to a gasser,one thing i've learned.......the hard way,is to kick it over properly........
-
Check your foot pegs aren't loose one of mine was,sounded terminal for the engine!
-
A trick you can use,is pour boiling water on the ali,helps break to bond between the bearing shell and the swing arm
-
Forget the posh plug,i've been told today that Lampkins say change the plug after 3 trials,that'll get expensive if you go iridium!!!!!
-
What was the factory standard sprocket set up?
-
If you can get a sample,Halfords can match it,they did some for my old Mont
-
Here's a good drink recipe.........................1/2 pint pure fruit juice,1/2 pint flat lemonade and a pinch of salt,works pre,during and post ride.and post beer!
-
Cheers bud,i've had the Gasser in bits already!!!!!!!!!!!!!! shud av kept the mont!
-
Hi,is the front sprocket a bit loose,mine was,it drove me nuts.or it could be a wearing chain.
-
You could try Unipart motor factors or any Facom tool suppliers,also Demon Tweeks do the but they're a bit pricey,the Facom ones are a good bit of kit,they're supplier to Ferrari.
-
At last it's done !!!!!!!!!!!!!!!!!!!!!!!!!,took 2 of us though,thanks to everyone that offered advice. Merry Christmas.
-
Sorry my mistake,i meant to type 80:1,it's been a long week
-
Hi,70:1 is about 63ml per 5 litre
-
Hi,getting p ssed off now,i think i've got the gear on wrong,can anyone tell me the correct position between spring and gear.spoke to gagas the other afternoon,but i must have misunderstood kev,got to get it done soon,i want to ride on 28th.Cheers
-
Got the gear swapped over,re-assembled,and re-installed in the motor,now the kickstart won't return,help........!
-
Hi,the bits have arrived,what a job to swap the gear over,any tricks on how to remove the spring?
|
|
