Jump to content

b40rt

Members
 View Profile  See their activity

  • Posts

    6,083

  • Joined

  • Last visited

 Content Type 

Everything posted by b40rt
 
 
  1. b40rt

    TY250 Flywheel

    b40rt replied to LaVern's topic in Yamaha

    TY350 ?
  2. b40rt
    Martin Pennycook also.
  3. b40rt
    Gerry Minshall is one of the best sources for many pre 65 parts. Look him up on Facebook.
  4. b40rt
    Try https://www.tytrials.com/
  5. b40rt
    @FullMotoJacket thanks for that 👍
  6. b40rt
    I've never even seen pictures of 2 up seat for txr312, I'm not sure the sub frame was designed for this.
  7. b40rt
    Or just go to a friendly / educated test station and save the hassel 😎
  8. b40rt
    One of the reasons they didn't use the clutch, back in the day, was because you couldn't 😂
  9. b40rt

    Swm 1982 Clutch Fix

    b40rt replied to reginald's topic in SWM

    @cleanorbust
  10. b40rt

    Tx300

    b40rt replied to rockaria's topic in Aprilia

    @tshock250 😁
  11. b40rt
    I ran a 428 chains on a 120kg bsa for many years (plus 80++kg rider) More than capable, and lighter as stated above.
  12. b40rt
    Stamp the number !!!!
  13. b40rt

    Oil leak

    b40rt replied to Ninja's topic in Bultaco

    I think there should be a felt seal on the sprocket side. Thinner oils and higher temps will exaggerate the problem.
  14. b40rt
    Can you not achieve the desired gearing with a few more teeth on the rear ? More flywheel would slow the engine response ?
  15. b40rt
    You sound a nice person ....
  16. b40rt
    Is the air filter properly oiled ?
  17. b40rt

    349 prices

    b40rt replied to netley's topic in Montesa

    Upped the gearing, they were good for 70mph in standard form ......
  18. b40rt
    Not jgas specifically, but some get leavers require a wedge (plain screwdriver) tapped in to open them slightly to fit.
  19. b40rt
    The condensor/capacitor in the picture is damaged, if you didn't do the damage, this is probably your problem.
  20. b40rt
    Volkswagen 👍 12v is fine.
  21. b40rt
    Check the part number for points as I wouldn't be surprised if several models used the same ones. Move the condensor and mount it by the coil (I use vw ones)
  22. b40rt
    Change the condensor, points and plug and try again .
  23. b40rt
    https://www.inmotiontrials.com/product-category/parts/twinshock/bultaco/
  24. b40rt

    RPM range

    b40rt replied to Ftwelder's topic in Classic Trials

    A correctly designed expansion chamber, with long front pipe and absorption type silencer can be very effective. Excellent low power and acceptable noise level.
  25. b40rt
    The lower forks appear to be maybe 3 pieces ? ie heavily modified so the original spec may not be to relevant.
 
×
  • Create New...