Jump to content

zippy

Members
 View Profile  See their activity

  • Posts

    3,372

  • Joined

  • Last visited

 Content Type 

Everything posted by zippy
 
 
  1. zippy

    2000 Sherco 2.9

    zippy posted a topic in Sherco

    I recently purchased a 2000 Sherco 2.9. I love the bike but have to fix a couple of things. One of the holes for the front axle pinch bolts is stripped out. Has anyone tried to drill and tap one of these holes in the forks, or should I use a helicoil? The weld on the rear skid plate mount on the left side of the bike is cracked, and the skid plate has a small crack near the radius of the plate. How common are these cracks? "obviously whoevever set up these sections thinks I ride better than I do."
  2. zippy
    Bikespace, You won't get any complaints from us thick people in the U.S. ,(we know who we are) we can't yell loud enough to get it to carry over the pond. "Obviously whoever set up these sections thinks I ride better than I really do."
  3. zippy
    I too agree that seeing all the 05's cycled through would be a good idea. Isn't the Sherco 4t basically an 05 2.9 with a 4-stroke stuffed in the frame instead of the 2.9 motor? Did the Mont get a total ground up design?
  4. zippy

    Setting Sag

    zippy replied to erixon's topic in Gas Gas

    I hail from the land of "If you don't like the weather, wait 5 minutes it will change." also known as Michigan.
  5. zippy

    Setting Sag

    zippy replied to erixon's topic in Gas Gas

    I am new to the forum and would like to say HI. I am somewhat of a large guy (230 pounds) and I have a 95 Fantic section that I used to ride before getting the much better 2000 Sherco 2.9. The preload spring was set right up to the top of the threads. It seems to be performing just fine.
 
×
  • Create New...