designtime

Berkett recomends 70-1 mix

There are no spacers! The question is, why is the tank rubbing? Are the mounts bent? Plastic padding or the resin should be Ok. Don't remove all the paint unless you intend to use a plasticizer primmer. The kick-start is a common problem. It shouldn't rattle unless the ball and spring is missing inside. I think the damage is done mostly when you push it in after starting it. Yes thats correct the fixing points are about a half inch away from the lugs. Make sure cylinder nuts is domed shape. I put some foam padding on the frame where the tank sits to stop the paint rubbing off. Grind of the welds on the outside edge of the silencer and it should split in half and then just re-weld the original joints.

As far as I know all you have to do is remove the fame lug on the kickstart side. This gives you a lot more room and makes it easier to replace the rubber connector on the back of the carb which is normally very tight. Haven't done it myself but I know it is a Berket approved mod. and I know a rider who has done it. Darren

I wash mine with a hose and then I polish them with the Plutoline Wax. Then I keep them in the box supplied. They always look brand new! Fantastic Boots so comfy

I am after a Front Michelin X Light Trials Tyre but no one has any! Any idea's where I could get one? Regards Darren

Its old inaccurate news and a terrible english translation! Another earlier thread mentioned a rescue plan from the French Government.

How much are they?

Lets hope so, that would be fantastic news.

I found this review: The D2 Open Face is a new lid aimed primarily at 4X racers, dirt jumpers, street riders and freeriders who want more vision than that of a full face helmet and also extra protection over a regular lid. It's based on the full face design and this retro-styled helmet offers a super comfy fit with good ear space and a soft padded lining that can be removed and washed when it becomes too stinky. The push buckle chin strap is simple to use even while wearing gloves. We'd be worried about our teeth, though, and at this price would prefer the all-round protection of a full-face. Great for showboaters and Star Wars fans then, but not a realistic choice for most folk. I don't think it is a trials helmet! Old troy I defiantly haven't seen him riding at any local south center trials.

How about this HEBO ZONE CARBON FIBRE TRIALS HELMET SIZE XL-975 GRAMS Item number: 290331121650 Buy it Now for

HEBO ZONE 2 CFTT CARBON ULTRA LIGHT WEIGHT HELMET WITH VENTS Best bar none! No crash helmet will eliminate sweating but this will defiantly reduce it. I have been wearing mine all day and never felt I had to remove it because I was to hot. Looks fantastic, and weights nothing. The only down side is the price!

Translation: Following the declaration of dated January 16, 2009 suspension of payment, the Scorpa company could continue its activity during almost the 6 months of period of observation in order to allow to find a solution to ensure the perenniality of the company. A plan of continuation had been considered but could not be implemented for lack of agreement obtained with the principal bank of the group. By mutual agreement with the bodies of the procedure the discussions continued within the framework of a plan of transfer. Several transferees presented themselves and two were retained: - An Italian investor associated with the company Gas Gas presented a revival project of the activity, part of stocks and guaranteeing 75% of employment and a maintenance on site under the condition precedent of an agreement of maintenance of the supply engines by the company Yamaha Motors. The latter warned by her council which she did not wish to continue the supply within the framework of the project Gas Gas. The court noting that this essential condition with the realization of the offer not being filled, the offer of Gas Gas was not maintained. - The Fites company, representing the interests of Mr. Marc Teissier and owner of the Sherco manufacturer deposited an offer with resumption of l' activity with part of stocks, maintenance of 25% of employment and a removal of l' activity on the site of their factory of Nimes. The court considered that the social aspect of this offer was not satisfactory. Thus, the Bankruptcy court of Nimes pronounced the liquidation of the company. The procedure of disposal of the material and immaterial goods will be carried out by Me Pierre Julien, Mandataire Legal, 9 Blvd Victor Hugo - 13100 Tarascon

The translation from Babelfish RECALL The manufacturer of motor bikes trial was placed in L' compulsory liquidation; announces compulsory liquidation of the manufacturer of motor bikes trial Scorpa, company window of the mechanical Pole d' Ales, constitutes the first large failure of the industrial site and leisures launched by the mayor d' Ales max Roustan (Midi Libre d' yesterday). One includes/understands better why aujourd' today its Christophe Rivenq, principal private secretary, is more qu' land-mark.

http://www.birkettmotosportukltd.co.uk/ Nigel is the official importer. Birkett Motosport UK Limited The Old Woodyard, Foxfield Road, Broughton-in- Furness, Cumbria LA20 6EZ Tel:01229 716806 Fax:01229 716214 It is

I had the same problem it was the thermostat