|
-
They need to be challenging that is why they are meant to be British Championship so they test the best youth riders in the country, and not a club level standard
-
-
IRC one's are faster wearing is what i have been told
-
that will take the strength out of the frame obviously!
-
-
there is a xispa competing, number 192 Miquel Vergel, and is doing really well, currently lying in 35th position
-
i have some in my 07 125 sherco, they made the bike completely different alot livelier, seemed more bottom end, and main difference is that they rev out more
-
just click on results and it comes up with a thing qhihc scrolls down and shows results for everyday
heres the link:
http://www.ssdt.org/index.php?option=com_w...r&Itemid=11
-
ok, any idea about the bearings?
-
Hi seen these jitsie throttle bearings and tube on the internet but cant find them anywhere else, the problem is the company is based in Australia so was unsure the link shows the page, if anyone had any experience in using either the bearing or the tube please let me know, i remember trials uk had the tubes but there not on their site anymore
http://www.thehellteam.com/catalogue/c18/c158
-
i have ridden one and the power was more revvy than bottom end compared to the sherco i ride
-
-
not a major job but it involves taking the legs out, draining the oil, and then changing the seals, simple when you know how
-
no the seal will be leaking now and you will have to replace it, this is because when the leg slides in even the smallest mark can rip the seal and allow oil to pass through it
-
the seals can break for a number of reasons but compressing when you compressed the forks alot there may have been a mark further up the stanchion and this could have broken the seal
-
is it a 2010 or the old model?
-
yeah that should solve the problem
-
-
It will be that there is a small felt washer on the bolt which holds the float bowl on so i would imagine that this will be the problem because if its that fuel will leak, or if the bolts not tight
-
the tanks on the first batch that came through had that problem, but that was only what 20 bikes? they have now fixed this and are fine
-
erm, you will need about 4psi in the rear
-
need 80cc's/ml of two stroke oil to every 5 litres of fuel
-
-
why do people just want to try and find negatives about every new bike that comes out?
-
where can you get a full set of results from online?
|
|