rapid roy Posted September 18, 2006 Report Share Posted September 18, 2006 (edited) mitas ET-01 trials off road rear tyre 400 -18 inch OFFERED ON E-BAY BUY IT NOW FOR Edited September 18, 2006 by rapid roy Quote Link to comment Share on other sites More sharing options...
coxy Posted September 18, 2006 Report Share Posted September 18, 2006 dont get it they are apsolute cr*p, the tyre is a really hard compound, its worth waiting for a different tyre or buying a new michelin or irc for 60 quid you will feel happier in the long run 1 Quote Link to comment Share on other sites More sharing options...
john b Posted September 18, 2006 Report Share Posted September 18, 2006 I've ran a couple of rear tyres (please bear in mind I'm an easy route rider!!!), and don't discount them..... First one was on a Scorpa 125T, and I've recently put one on my Beta 200. Agree they are a hard compound, and you have to run them at 3psi max, BUT they have served me very well. They last for ages, and for me (and remember I'm an easy route rider) they give no worse grip than others I've tried. Two weeks ago was a particularly muddy trial (Shafto Craggs) and certainly the Beta gripped as well as anything else.. People vote with their feet, and I have bought two in a row cheers John. Quote Link to comment Share on other sites More sharing options...
rapid roy Posted September 18, 2006 Author Report Share Posted September 18, 2006 (edited) HI COXY ARE THEY POOR ON MUD OR ROCKS OR BOTH CHEERS Edited September 18, 2006 by rapid roy Quote Link to comment Share on other sites More sharing options...
ausy300pro Posted September 18, 2006 Report Share Posted September 18, 2006 I have not tried the mitas tyres but have used vee rubber rear and that was very close to an irc, great in the mud run it about 3 p.s.i. not as soft as a mich but a worthwhile alternative and great value at Quote Link to comment Share on other sites More sharing options...
scorpa3 Posted September 18, 2006 Report Share Posted September 18, 2006 Quote Link to comment Share on other sites More sharing options...
Guest betarick32 Posted September 18, 2006 Report Share Posted September 18, 2006 I had one of these mitas tyres on my old techno no grip at all then i tryed a pirelli and that was not much better dunlops and michelins are the best! Quote Link to comment Share on other sites More sharing options...
coxy Posted September 18, 2006 Report Share Posted September 18, 2006 the are rubbish on everything the compound of the tire is too hard Quote Link to comment Share on other sites More sharing options...
windlestone Posted September 18, 2006 Report Share Posted September 18, 2006 (edited) Its all a load of rubbish its like buying a pair of trainers at the Edited September 18, 2006 by windlestone Quote Link to comment Share on other sites More sharing options...
john b Posted September 18, 2006 Report Share Posted September 18, 2006 Good to see some objective replies, with a bit of thought................ I've found them to be no worse than any others I've tried, and in fact in muddy conditions (when run on very low PSI) have found them to grip very well. Now I'm no expert rider, so maybe if I was to hop on a 6ft rock step, with an adverse camber then maybe I might be thinking "mmm maybe this compound is a bit hard, and not as sticky as some others......!" And I buy not on cheap, but value for money - there is a difference (by the way - does anyone get taught English at school these days !!!!) cheers John. Quote Link to comment Share on other sites More sharing options...
bikespace Posted September 19, 2006 Report Share Posted September 19, 2006 Probably for another thread, but at Quote Link to comment Share on other sites More sharing options...
scorpa3 Posted September 19, 2006 Report Share Posted September 19, 2006 Its all a load of rubbishits like buying a pair of trainers at the Quote Link to comment Share on other sites More sharing options...
feetupfun Posted September 20, 2006 Report Share Posted September 20, 2006 I found the MITAS was fine except where a Michelin would conform well to the shape of the edges of hard objects, the MITAs would not conform quite as well. I wondered why until I measured the depth of the MITAS carcass and found it had about 1/2" less depth overall than a Michelin/Dunlop (ie lower profile than Michelin/Dunlop). Less depth = shorter contact patch. Grip on dirt, smooth large rocks and large logs was fine with the MITAS. Test bikes were 2003 Rev 3 200 and 1976 Cota 348. Quote Link to comment Share on other sites More sharing options...
copemech Posted September 21, 2006 Report Share Posted September 21, 2006 The VeeRubber seem the nuts for the money. Much softer and grippy on the rocks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.