andyh Posted November 1, 2006 Report Share Posted November 1, 2006 hi all i have just replaced the fork seals and have a prob. the fork has a long spring (20in) and a short spring (25mm / 1.5in) in length and i cannot remember where the short spring goes. does the damper rod go through the spring before if is secured by the allen screw going through bottom of fork slider? i seem to remember it falling out of the chrome fork leg when i turned it upside down to drain the remain oil. many thanks in advance andyh Quote Link to comment Share on other sites More sharing options...
paioli Posted November 1, 2006 Report Share Posted November 1, 2006 fix damper rod first , long spring in top first then small spring then fork top. Quote Link to comment Share on other sites More sharing options...
andyh Posted November 1, 2006 Author Report Share Posted November 1, 2006 thanks for the reply. my forks have a 3in spacer on top of the spring then top fork nut. would this mean it still goes where you said it does. many thanks in advance. andyh Quote Link to comment Share on other sites More sharing options...
totalshell Posted November 1, 2006 Report Share Posted November 1, 2006 spacer would be last thing you put in tube then screw in top nut Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.