andy.t Posted March 31, 2007 Author Report Share Posted March 31, 2007 That looks great, let us know how different the bike feels with it. please.Did you just use the RD350 manifold, or the reed block as well? ScottT, I only used the manifold as the reed cage section on the RD350 which enters into the barrel is far too big to fit the TY175,the only other thing is you have to shave a small section of rubber off the RD manifold which use to protrude into the RD cage which is easily done with a Stanley blade. I will let you know how it goes after the trial. Quote Link to comment Share on other sites More sharing options...
andy.t Posted April 1, 2007 Author Report Share Posted April 1, 2007 Done the trial today and...........what a difference the boost bottle and RD350LC inlet has made, the bike feels much more lively all round,more power,even the exhaust note has got more of a crack to it,luv it. Quote Link to comment Share on other sites More sharing options...
andy m Posted April 1, 2007 Report Share Posted April 1, 2007 That proved me wrong then I was always under the impression it was a load of bull. Wrong again. Quote Link to comment Share on other sites More sharing options...
scottt Posted April 1, 2007 Report Share Posted April 1, 2007 Thats great Andy, what other mods have you made to your bike? Quote Link to comment Share on other sites More sharing options...
subanator Posted April 2, 2007 Report Share Posted April 2, 2007 In principle, this is similar to the reed block spacer buy adding volume and for more torque and midrange. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.