lee harris Posted November 23, 2006 Report Share Posted November 23, 2006 http://cgi.ebay.de/ws/eBayISAPI.dll?ViewIt...A:IT&ih=018 This piston set was up in spaggehtti land. i can have it for 75 quid incl post. Can you see from the pic if its a 305 or 301 piston? The sizes are the same i think. How big are the 305 windows...the should be visible if the were there...what do you think? Lee Quote Link to comment Share on other sites More sharing options...
fanticisti Posted November 23, 2006 Report Share Posted November 23, 2006 The 305 piston had 3 holes in triangular layout with bottom 1/3 of piston cut away in arch shape. Newer models were also faced off at the side with a shorter gudgeon/wrist pin, making some 305's a lot noisier than others The one in the photo doesnt look relieved at sides or on the back face - hard to tell. Your milling machine should make short work of the profile, but have you also considered the inside width between the two piston journals dependending on your small end bearing length. 115 euoros doesnt seem a bargain? Good luck but dont let evil bay bite you just cos you got a deal on that snazzy Caballero! Quote Link to comment Share on other sites More sharing options...
ask greeves Posted November 23, 2006 Report Share Posted November 23, 2006 (edited) Hello Lee, Looked at this piston myself, and dismissed it. It looks like a single ring (Dykes ring) piston. The biggest piston using this design on a Fantic is a 240, but on a 240 the distance from the wristpin to the cut out is nearly the width of the wristpin, whereas on the piston shown the cutout seems to be directly underneath the wristpin....so i don't know....i see the guys taken a picture including the Italian book...to try to identify the piston. I personally don't think its a Fantic piston....over to the experts !!!! ps picture of 305 piston, funny... i always thought the 305 was noisey because the piston had no integeral strength because off the centre cutout, leaving the two tags either side of the cutout unsupported, on noisey 305's the piston, when measured by the tags, always comes out lots undersize. Edited November 23, 2006 by ask greeves Quote Link to comment Share on other sites More sharing options...
lee harris Posted November 23, 2006 Author Report Share Posted November 23, 2006 (edited) @ peter b...def has 2 rings. Chris thinks the piston is a 240. that bore leads me to 249....... @fanticisti a 306 piston I can get for 130 yoyos- A 303/301 is rarer than weapons of mass destruction in Iraq and cost closer to 200 yurozzs. 240 pistons are like rocking horse poo and are unobtainiam!! PS What happened to fracys post on the 300 front brake? 6 beers down in central yurup Edited November 23, 2006 by Lee Harris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.