vaughan Posted November 30, 2006 Report Share Posted November 30, 2006 Many Thanks for all the advice on how to remove a tyre from the rim, some sound advice and some best left be, Now that my new tyre is back on the wheel, How do I get the bead baxck on the rim so I can blow it up, air pressure alone does not work, is there some trick way, I once saw Clarkson on top gear put Lighter fluid in a deflated tyre then throw a match at it the explosion nicely popped the tyre back onto the rim and inflated it too, I wont be trying that though, well not just yet. Cheers, Vaughan. Quote Link to comment Share on other sites More sharing options...
dixie Posted November 30, 2006 Report Share Posted November 30, 2006 said this bit was fun take the valve out of the stem(lets more air in faster) the best peice of kit is one of the foam rings but av old pushbike inner tube will do,cover it with tyer soap or fairy liquid mount both sides of the tyer as norm then push the tube/ring in the gap between the tyer and rim,blow away ,compresser almost vital here, the pressure will push the ring out of the gap as it inflates good luck Quote Link to comment Share on other sites More sharing options...
vaughan Posted November 30, 2006 Author Report Share Posted November 30, 2006 said this bit was funtake the valve out of the stem(lets more air in faster) the best peice of kit is one of the foam rings but av old pushbike inner tube will do,cover it with tyer soap or fairy liquid mount both sides of the tyer as norm then push the tube/ring in the gap between the tyer and rim,blow away ,compresser almost vital here, the pressure will push the ring out of the gap as it inflates good luck Cheers Dixie, I was'nt looking forward to the Lighter Fluid method. Vaughan. Quote Link to comment Share on other sites More sharing options...
john.b Posted November 30, 2006 Report Share Posted November 30, 2006 Maybe you were not looking forward to the lighter fuel method but we certainly were. For sale: One smoke damaged rear wheel may need new rim tape and some alloy welding. Quote Link to comment Share on other sites More sharing options...
barrybaines Posted November 30, 2006 Report Share Posted November 30, 2006 Or my personal favorite Get one (or two if one isn`t long enough) old ratchet strap put round the circumferance of the tyre and tighten enough too squash the tyre out and the bead onto the inner rim, with valve out and slippy stuff on tyre inflate with compressed air, job done NOTE: be sure too have ratchet in the undo position before inflating! I found out too my cost once that the strap wil explode and whip you quite nicely if you forget too do so Quote Link to comment Share on other sites More sharing options...
dixie Posted November 30, 2006 Report Share Posted November 30, 2006 barry i think i am starting to understand where you reputation,ney fame,or infamosity come from????? live the life pay the price...... Quote Link to comment Share on other sites More sharing options...
2fargone Posted November 30, 2006 Report Share Posted November 30, 2006 (edited) Or my personal favoriteGet one (or two if one isn`t long enough) old ratchet strap put round the circumferance of the tyre and tighten enough too squash the tyre out and the bead onto the inner rim, with valve out and slippy stuff on tyre inflate with compressed air, job done NOTE: be sure too have ratchet in the undo position before inflating! I found out too my cost once that the strap wil explode and whip you quite nicely if you forget too do so It always makes me laugh reading the Tubless tyre dilemas, because it reminds me of my first Beta TR34 which was probably one of the first bikes to have a tubeless tyres on and it was a complete mystery to us how to deal with the bloody things, and the problem still rears its ugly head even today 20 years later, It makes me wonder how we managed back then without all these gadgets, becauase it used to be nothing more than a good 'dig' with the heel of your Alpinestar that did the trick. Getting it back on was always fun, sometimes they would pop out first time and yet other times It could take half a day. Yes BB the ratchet strap was a last resort after you had tried every other way including shaking the whole wheel like a mad man in the hope it might just seal,and yes it was fun trying to find the release button on the strap before as you say the dam thing flew off and belted you! Never resorted to the angle grinder though Perce Good luck Vaughan you are not on your own! Edited November 30, 2006 by 2fargone Quote Link to comment Share on other sites More sharing options...
vaughan Posted November 30, 2006 Author Report Share Posted November 30, 2006 Thanks you lot, Not only have I got some great tips re tyre replacement but I have had a bloody good laugh as well. Cheers, Vaughan. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted November 30, 2006 Report Share Posted November 30, 2006 One thing of note is that old tyres and new are different animals. Old tyres especially ones that are being turned are usually easy. new michelins that have been stacked can be very difficult and ratchetstraps lighter fuel etc will only work if you are lucky. Get a beader get some tyre soap and that WILL always work. Quote Link to comment Share on other sites More sharing options...
dale Posted November 30, 2006 Report Share Posted November 30, 2006 Got to agree with Dabster - new tyres with the beads touching are a nightmare! One tip i was given - get a old inner tube -car/bike - place in tyre and really blow it up as much as you dare - leave somewhere warm over night - then fit - hopefully a new tyre should go on as easy as a old one. Quote Link to comment Share on other sites More sharing options...
husky Posted November 30, 2006 Report Share Posted November 30, 2006 I take mine to a local tyre depot and get them to change it.Saves a lot of grief and costs a fiver(though some of my tight mates would rather struggle and draw blood than spend the money) Quote Link to comment Share on other sites More sharing options...
kinell Posted November 30, 2006 Report Share Posted November 30, 2006 I take mine to a local tyre depot and get them to change it.Saves a lot of grief and costs a fiver(though some of my tight mates would rather struggle and draw blood than spend the money) I used to do that, pain in the a*** though! Bought a tyre beader and a compressor and have never had any trouble since. No donuts though, I'm on a diet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.