mad4it Posted December 5, 2006 Report Share Posted December 5, 2006 Can anyone please enlighten me i have a 07 290 sherco and have a keihin carb for it, and am not sure as to what jetting is best ,also the inlet on the keihin is larger than the stock dellorto do you need to mod the aibox inlet or will it go on with a bit of brute force help much appreciated! Quote Link to comment Share on other sites More sharing options...
copemech Posted December 6, 2006 Report Share Posted December 6, 2006 I ran the 45/125 setup on the last one! You will need to have a new intake air hose! PM Nigel Dabster to see if he still has an extra! Quote Link to comment Share on other sites More sharing options...
mad4it Posted December 6, 2006 Author Report Share Posted December 6, 2006 Cheers for that i will look and see about a new inlet for the airbox .The jetting that came with the carb was a 45/150 . Quote Link to comment Share on other sites More sharing options...
copemech Posted December 6, 2006 Report Share Posted December 6, 2006 Some have used automotive radiator hose cut to about 75mm but a reinforced hose is better. Quote Link to comment Share on other sites More sharing options...
robin m. s/c Posted December 10, 2006 Report Share Posted December 10, 2006 If you warm up the intake it hot water it will stretch over the Kehin Carb. I've run mine through the whole of 06 like this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.