pat Posted December 18, 2006 Report Share Posted December 18, 2006 Hi, Have some questions about pipe for Scorpa 2-s. Ref. to a bike I saw, guess model 2001-2002 lighter blue than 2005, it was equiped with a nice pipe, stainless MX-like expansion chamber. A pipe not at all like these for GasGas or Beta. Could it have been a stock pipe? Or did someone offered kit pipes for Scorpa? Cheers, Pat Quote Link to comment Share on other sites More sharing options...
lastplacebrad Posted December 19, 2006 Report Share Posted December 19, 2006 Depending on where you are in the world?, there were a couple of pipes made by Nigel Birkett to improve the performance and bring it up closer to that of the TYZ motor (same engine) which year (if not all) they fit or even if any of these pipes made it out of captivity is anyones guess!! Quote Link to comment Share on other sites More sharing options...
boofont Posted December 19, 2006 Report Share Posted December 19, 2006 Ref. to a bike I saw, guess model 2001-2002 lighter blue than 2005, it was equiped with a nice pipe, stainless MX-like expansion chamber. A pipe not at all like these for GasGas or Beta. Expansion chamber? Do you mean silencer? The silencer changed from the 02 to the 03 if that's what you mean. As for bring it up closer to a TYZ, I had a TYZ and it never ran any where near as good as my SY, pretty flat in some respects compared to the SY. Mind you, that might have been due to the weight differance. Quote Link to comment Share on other sites More sharing options...
betamike Posted December 19, 2006 Report Share Posted December 19, 2006 could it have been one of the rotax scorpas? 99 model? Quote Link to comment Share on other sites More sharing options...
lastplacebrad Posted December 19, 2006 Report Share Posted December 19, 2006 Ok i may of just dreamt all that but i'm sure i have read or been told the above!!, though i bow to the superior power of the boof on all things Scorpa! Quote Link to comment Share on other sites More sharing options...
boofont Posted December 21, 2006 Report Share Posted December 21, 2006 Moved to Beta, I'll still be here to offer any advice though! Quote Link to comment Share on other sites More sharing options...
pat Posted December 27, 2006 Author Report Share Posted December 27, 2006 Betamike, thanks! It was probably this model I saw. But the pipe I saw had a beautyful "kit look" stainless and welded "expansion sections" closer to the outlet, not chromed symmetrical pipes. Rotax 99? Wasnt there a real Yam made trial 00-01? Ok, so Scorpa are using the TYZ engine 01-06? And Yam still hold their coat over Scorpa manuf....unofficially Cheers, Pat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.