john nelson Posted January 16, 2007 Report Share Posted January 16, 2007 Hi all. With your help I managed to get sparks on my bike again. Another info request, this time on the frame, I have 2 frames, one has a thread on the left hand side swinging arm spindle hole the other does not have this, is one worn or are there 2 types of frame. Also does anybody know where I can get a workshop manual. Thanks John Quote Link to comment Share on other sites More sharing options...
fantic156 Posted January 16, 2007 Report Share Posted January 16, 2007 Just looked at mine and there is a thread on the left and side of the frame for the swinging arm spindle. No workshop Manuel but have a poster listing all the engine parts and showing where they go (Blagged it from Roy Carey when visiting the workshop back when I was a lad). Did see on flebay that someone has photocopied a poster that looks the same as mine and was selling copies, might be worth a look. Don't know which 200 you have. The rear or forward kickstart engine? That may explain the 2 different frames but I don't know much about the differences. Sorry Quote Link to comment Share on other sites More sharing options...
peterb Posted January 16, 2007 Report Share Posted January 16, 2007 Hello John, If you are in the Uk then Bill Pye in Great Ayton used to have heaps of spares for Fantics and may be a source of good info. I can't help otherwise but was wondering if you are John Nelson from Guisborough UK? (An old friend). Also, thanks to Slapshot 3 for helping out with posting replies. Bye, Peter B. Quote Link to comment Share on other sites More sharing options...
slapshot 3 Posted January 16, 2007 Report Share Posted January 16, 2007 Hello John,If you are in the Uk then Bill Pye in Great Ayton used to have heaps of spares for Fantics and may be a source of good info. I can't help otherwise but was wondering if you are John Nelson from Guisborough UK? (An old friend). Also, thanks to Slapshot 3 for helping out with posting replies. Bye, Peter B. No problem Quote Link to comment Share on other sites More sharing options...
mk1 Posted January 17, 2007 Report Share Posted January 17, 2007 have a look on ebay theres a 200 manual on cd if it helps Quote Link to comment Share on other sites More sharing options...
ask greeves Posted January 17, 2007 Report Share Posted January 17, 2007 (edited) The swing arm spindles are 2 different sizes, back kick 16mm and forward kick 20mm. As far as I am aware, all frames were threaded. The back kick clamps the thread on the left. The forward kick clamps the plain rod on the right. Hope this helps. Edited January 17, 2007 by ask greeves Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.