leggins Posted January 19, 2007 Report Share Posted January 19, 2007 My rev 3 kickstart has stopped returning to the top position after kicking up. is this a problem with a return spring ? cheers Leggins Quote Link to comment Share on other sites More sharing options...
essex rider Posted January 19, 2007 Report Share Posted January 19, 2007 this is of no use to you but my sherco kick start has started this. The little screw on the beta one, take it out and see if you can separate the two bits. if not i used to put 3 in one oil in there and wiggle Then fill with grease and replace screw Quote Link to comment Share on other sites More sharing options...
slapshot 3 Posted January 19, 2007 Report Share Posted January 19, 2007 leggins, moved this in here, hopefully you might get more answers. Cheers Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 20, 2007 Report Share Posted January 20, 2007 Leggins, chances are your kick start return problem is due to a bad gasket and or over tightened bolts on the primary cover. (clutch cover) I`ve never seen a bad return spring on a Beta. Quote Link to comment Share on other sites More sharing options...
Andy Posted January 20, 2007 Report Share Posted January 20, 2007 leggins,moved this in here, hopefully you might get more answers. Cheers Not if you lock the topic he won't Unlocked and seperate topic merged with this one - I think! Quote Link to comment Share on other sites More sharing options...
leggins Posted January 21, 2007 Author Report Share Posted January 21, 2007 Leggins, chances are your kick start return problem is due to a bad gasket and or over tightened bolts on the primary cover. (clutch cover) I`ve never seen a bad return spring on a Beta. Come to think of it I did tighten the bolts on the primary cover as one had worked loose. thanks lineaway Ill give that a try cheers Leggins Quote Link to comment Share on other sites More sharing options...
leggins Posted January 27, 2007 Author Report Share Posted January 27, 2007 Leggins, chances are your kick start return problem is due to a bad gasket and or over tightened bolts on the primary cover. (clutch cover) I`ve never seen a bad return spring on a Beta. Come to think of it I did tighten the bolts on the primary cover as one had worked loose. thanks lineaway Ill give that a try cheers Leggins worked a treat kickstart back to normal working order.... thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.