dazza70 Posted February 10, 2007 Report Share Posted February 10, 2007 My 320 rear brake has stopped working. I have tried bleeding & pressure bleeding but to no avail. It feels like the master cylinder isn't working properly. Is there any adjustment on the master cylinder? Is there any other things that I can try. Quote Link to comment Share on other sites More sharing options...
slack Posted February 10, 2007 Report Share Posted February 10, 2007 Hi dazza 70, i had the same problem on my 320 last year. I took the adjuster from the back brake to the master cylinder (the small threaded bolt that fits into the m-c ) & put a pozee screw driver inside the master cylinder which gives u a better push at it,the brake bled straight away with no problems,or try back bleeding from the calliper. also check your pads. hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.