Jump to content

Sherco 125 Clutch Prob


rapid roy
 Share

Recommended Posts

 

I once had very similar problen on my 290, I put a new kit in the master and striped the slave but no success!. Felt good but after riding for 20 minutes It ended up having to much play.

After half a day I finally discovered it was simply a 'blocked' gearbox breather tube.

With the increase in temperature whilst running the expanding air would push the slave cylinder back thus leaving too much play to take up.

Hard to believe but true.

Hope this helps!

Cheers.

Edited by haggis1
Link to comment
Share on other sites

 
I once had very similar problen on my 290, I put a new kit in the master and striped the slave but no success!. Felt good but after riding for 20 minutes It ended up having to much play.

After half a day I finally discovered it was simply a 'blocked' gearbox breather tube.

With the increase in temperature whilst running the expanding air would push the slave cylinder back thus leaving too much play to take up.

Hard to believe but true.

Hope this helps!

Cheers.

HI haggis1

THE MORE AND MORE I THOUGHT ABOUT YOUR RESPONSE, THE MORE IT MADE SENSE.

LAST NIGHT I REMOVED THE BREATHER TUBE

AND SURE ENOUGH IT

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...