schweizmeister Posted February 16, 2007 Report Share Posted February 16, 2007 Does anyone remember seeing a picture of a monoshock Ossa in the motorcycle news back in the mid '80's. I think is was a prototype that never made it into production. I'm sure it was designated a '303'. I'd like to see the picture again if anyone has it. Quote Link to comment Share on other sites More sharing options...
hillary Posted February 16, 2007 Report Share Posted February 16, 2007 The Ossa importer of the era Roger Holden was playing about with one, but as to where you can get a picture, can't help. Quote Link to comment Share on other sites More sharing options...
trial pat Posted February 16, 2007 Report Share Posted February 16, 2007 I have a pic, but something new at forum. Ad pic button used to be under this box. If I click on the tree icon on top of box, it asks me about an URL instead the path on my pc... Mybe only today a problem? Pat Quote Link to comment Share on other sites More sharing options...
stu Posted February 17, 2007 Report Share Posted February 17, 2007 I had one, bought after the Scotish 6 days trial in (I'll have to think about that) 78 79 80.................! 6 were built for Scotland 2 teams of 3 John Renolds John Metcalfe and Chris Griffin from the north, as far as I know was never ridden by Mick Andrews? Was a fantastic bike way ahead of its time................. Wish I still had it...................... Quote Link to comment Share on other sites More sharing options...
baldilocks Posted February 17, 2007 Report Share Posted February 17, 2007 (edited) I think perhaps two different Ossa are being confused. Peter Quinn took over from Roger Holden as Ossa Importer in about '82. The factory sent brochures over of the 303 in late 1983 but none were ever imported. From memory I think the 303 was actually a twinshock and the engine was much the same as that in the gripper. Bearing in mind the mono yam came out in late 83 and the first mono beta in 84 the Ossa was never going to be a big seller. In the stock Quinns purchased from Roger Holden were some monoshock frames but these had been built in the 70's and were to suit the model before the Gripper, may have even been for the MAR. The monoshock system was quite primitive and was very similar to the Yamaha DT system. It was a single shock but fitted to a steel loop that started near the rear spindle and went up round the front of the rear wheel and then back down to the other side. Anyone who remembers the very early yamaha mono systems on the YZ and DTs will know what I mean. I dont know if it was really any more effective than a twin shock as I doubt the shocker would have been sophisticated enough to provide rising rate. John Reynolds rode one of these mono ossas in the Irish world round in the mid seventies and I think was the youngest points scorer for a while, JR was exceptional in mud. John ended up riding a JCM for Quinns during 85 and 86 and won a few nationals and scored points in the World rounds in Wales and in Ireland . Quinns tinkered about with trying to fit a JCM shock into an Ossa Gripper frame but it never made it to a trial. Ossa engines used to be very hard wearing, Quinns would often sell first oversize pistons to people for the green model and the Ossa Mar, those bikes could be anything up to 10 years old and still be on the original pistion. On the downside the gearbox was quite poor and the selector fork was easily damaged. Edited February 17, 2007 by Baldilocks Quote Link to comment Share on other sites More sharing options...
toofasttim Posted February 17, 2007 Report Share Posted February 17, 2007 (edited) Apparently there was an article about the Reynolds/Metcalfe monos in "Classic Bike" a few years ago. If anybodies got that article I'd love to see it. Below is a pic of the 303 (photo from Mats Nybergs site) . Clearly not a mono. Interestingly Ossa made a bike called a domino after they went bang. But it wasn't a mono either. Edited February 17, 2007 by TooFastTim Quote Link to comment Share on other sites More sharing options...
02-apr Posted February 19, 2007 Report Share Posted February 19, 2007 Weren't the monoshocks Whitlock framed? Quite fancied one at the time as an Ossa man but not as much as the monocoque Ossas ridden by Duncan Macdonald and his father a bit earlier. Anyone else remember them, they had cut down front forks as rear units, well ahead of their time. Quote Link to comment Share on other sites More sharing options...
2fargone Posted February 20, 2007 Report Share Posted February 20, 2007 (edited) Hi fellas, I think this could be one of the bikes being discussed. Can anyone put a name to the rider, Reynolds, Griffo, John Metcalfe ??? Or does that leg belong to you STU ? Hope this link works, as it is my first attempt with the dreaded 'Bucket' http://i164.photobucket.com/albums/u35/tou...ProlinkOssa.jpg Edited February 24, 2007 by 2fargone Quote Link to comment Share on other sites More sharing options...
jordi Posted February 20, 2007 Report Share Posted February 20, 2007 I thought the Ossa monoshock (or one of the versions) was built by Keith Horsman. Yes BJ I also remember Duncans Ossa it was black with silver rivetts holding the monoque together. This was around N. Wales in the mid seventies, did his father also ride one? Quote Link to comment Share on other sites More sharing options...
woody Posted February 20, 2007 Report Share Posted February 20, 2007 I'd put money on that being John Reynolds' Monoshock Ossa as he was the only Ossa UK 'works' rider on the mono at that time. Can't remember who made them but not Cheney. Don't think they were Whitlock either, pretty sure he only did the twinshock frame. Quote Link to comment Share on other sites More sharing options...
big mark Posted February 21, 2007 Report Share Posted February 21, 2007 There's some more pictures of this in Don Morley's Spanish Trials Bikes book. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted February 21, 2007 Report Share Posted February 21, 2007 Pretty sure john Reynolds had one in 76 or 77. Quote Link to comment Share on other sites More sharing options...
mattylad Posted February 22, 2007 Report Share Posted February 22, 2007 (edited) As I currently own two of these bikes I can add info as far as I know. There were 5 frames made by Eric Cheney for Ossa UK. 1 was a sidecar and later scrapped. (source Simon Cheney). They were both originally nickel plated although one is now bright yellow. My frames are slightly different where the seat and downtubes meet. Keith Horsman made a number of replicas his were different to the Cheney. (he could tell straight away from my photos that it was not made by him). He made me an alloy exhaust. I am always looking for info on the bikes so if you have a photo or history please drop me a line. Thanks Edited February 27, 2007 by mattylad Quote Link to comment Share on other sites More sharing options...
baldilocks Posted February 22, 2007 Report Share Posted February 22, 2007 the photo 2fargone posted is the same rear suspension design I was talking about but the frames Quinns inherited were not chrome, they were matt black so maybe there were at least two frame manufacturers. I'm pretty certain John Reynolds rode one in the Irish world round, i'm sure Ive seen a photo of him wearing the Charles Hurst bib from the event and you can see the bikes mono. Quote Link to comment Share on other sites More sharing options...
woody Posted February 23, 2007 Report Share Posted February 23, 2007 I always thought that the frame on JR's bike was done by someone else, not one of the Cheney frames. Don't know why, something I must have heard years back. Keith (not Eric) Horsman also made mono frames for the Ossa as well as the reed valve barrells (referred to as Harpower reeds) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.