the colonel Posted June 1, 2007 Report Share Posted June 1, 2007 Hi, I need to fit an engine kill switch to a 1960 Greeves with 250 villiers engine. The switch I have is a standard Yamaha TY replacement, with one back wire and one black/white lined wire. Can anyone tell me how easy this is to fit, I understand that one wire should be attached to the coil and one to an earth, but to be honest I'm not at all good with electrics and stay well clear of them usually! Any help would be appreciated Thanks Quote Link to comment Share on other sites More sharing options...
lee harris Posted June 1, 2007 Report Share Posted June 1, 2007 you got it exactly right. one wire to earth...on the frame and not the handlebar, otherwise you will wear the head bearings o Quote Link to comment Share on other sites More sharing options...
dave dix Posted June 11, 2007 Report Share Posted June 11, 2007 you got it exactly right. one wire to earth...on the frame and not the handlebar, otherwise you will wear the head bearings o Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.