Jump to content

Problem Starting 250cc Gas Gas


sparkysavage
 Share

Recommended Posts

I have only had the bike for one week ,ridden twice , changed plug ,starts ok when cold .sometimes starts on choke when hot .can anybody give me any clues to the problem. help help

thank you peterb

the gas gas is brand new 2006 model cleaned out carb and found a bit off muck but problem still persists any other ideas cheers les.

Edited by sparkysavage
Link to comment
Share on other sites

 

Hi there,

You give us very little to go on.

What year bike is it?

Is the petrol tank vent fitted correctly, eg: you can blow air into the tank. Is the petrol tap clear of obstructions.

Are you running 50:1 fuel/oil ratio (or similar)

Have you cleaned out the carb very thoroughly, including removing the emulsion tube, pilot screw, pilot jet and then blowing through the passage ways?

If the carb is thoroughly clean, and you still need the choke to start when warm, and the bike is getting on a bit, then the mag side crankshaft oil seal may have failed.

Best to provide us with a few more details.

Bye, PeterB.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...