wheelspintom Posted August 4, 2007 Report Share Posted August 4, 2007 can someone tell me how the "power" switch mounted on the handlebar of the cab replica and the 08 sherco works? can you change settings whilst riding? Quote Link to comment Share on other sites More sharing options...
copemech Posted August 5, 2007 Report Share Posted August 5, 2007 It changes the timing advance curve. Switch when you want! Quote Link to comment Share on other sites More sharing options...
wheelspintom Posted August 5, 2007 Author Report Share Posted August 5, 2007 can you instantly tell the difference once you have changed from map1 to map2 Quote Link to comment Share on other sites More sharing options...
the addict Posted August 5, 2007 Report Share Posted August 5, 2007 (edited) wheelspintom, I ve got the switch on the Caby, I have taped it up on stage 1, the only difference I personally have noticed on stage 2 is that it runs bad on most sections,like its very rich,might only come into its own at very high revs but not so good low down. Not needed to try stage 2 on any climbs or steps yet, number 1 map/setting is plenty on the 290 as it is Edited August 5, 2007 by The Addict Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.