gaver19 Posted September 3, 2007 Report Share Posted September 3, 2007 Can anyone offer some help?. I have a gearbox problem ive removed the engine stripped it down but i cant get the casing on the on the gearbox side to split. tripple checked ive left no bolts in place. Ive tapped it knocked try to lever it no joy. How tight are they, is there a technique or just keep percivering. Everything is off the engine thanks in advance Quote Link to comment Share on other sites More sharing options...
lee harris Posted September 3, 2007 Report Share Posted September 3, 2007 Hi Gav, if its the section motor you will need a puller. Big bolt onto end of crank, 3 arms eeach with a screw going into the side case under the flywheel. No other way I finx! Lee Quote Link to comment Share on other sites More sharing options...
gaver19 Posted September 3, 2007 Author Report Share Posted September 3, 2007 Cheers Lee is there a common fault on the section sounds like something slipping under load, its like the chain sliiping on the sprockets but its inside the engine cheers Gary Quote Link to comment Share on other sites More sharing options...
lee harris Posted September 4, 2007 Report Share Posted September 4, 2007 It sounds like you may have lost some teeth...i just bought a set of crankcases from steve goode...maybe he has the gearset also? Lee Quote Link to comment Share on other sites More sharing options...
gaver19 Posted September 4, 2007 Author Report Share Posted September 4, 2007 Lee are the 303 gearbox anywhere near? i have a few spare bottom ends. Gary Quote Link to comment Share on other sites More sharing options...
lee harris Posted September 4, 2007 Report Share Posted September 4, 2007 I have no idea. You will have to look when its split! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.