gordonblackley Posted October 18, 2007 Report Share Posted October 18, 2007 After years of Road racing (BSB) Enduro and some moto-x, I would like to give trials a go. However I have some questions. 1. Which brand of bike is the best (most reliable) when going for a cheap Approx Quote Link to comment Share on other sites More sharing options...
scorpa3 Posted October 18, 2007 Report Share Posted October 18, 2007 Hi Gordon, where are you based these days? Almost any of the modern trials bikes will suit you as a begginer, the 250's have more than enough poke. Most people use either Michelin or IRC but remember you will only need a couple or rears a year! It's not like racing where you get through a front and two rears on every bike each time you ride it! You are more than welcome to come down my way for a practice and try out my Scorpa. We will be riding in the Evesham club trial in Saintbury Quarry near Broadway this Sunday signposted from the A44 if you fancy a look. Pete Barnett Quote Link to comment Share on other sites More sharing options...
woody Posted October 18, 2007 Report Share Posted October 18, 2007 As a bike to start with you could do a ot worse than a Yamaha TY250 mono as you will get a good one, preferably one of the last models with a front disc as standard, for less than Quote Link to comment Share on other sites More sharing options...
blok Posted October 18, 2007 Report Share Posted October 18, 2007 I,m with woody TXT 250 or try for a mont 315,our kids had one for 2 years nearly an thrown it everywhere,down slopes,up trees an it still looks ok. Bomb proof, but you mite av to stretch to a grand or maybes 1200 . cheers Quote Link to comment Share on other sites More sharing options...
micm Posted October 18, 2007 Report Share Posted October 18, 2007 Quote Link to comment Share on other sites More sharing options...
paul w Posted October 18, 2007 Report Share Posted October 18, 2007 On the other hand they will go up anything... usually with the rider hanging off the bars like a flag in the wind! i think plater chips has a 290? Quote Link to comment Share on other sites More sharing options...
gordonblackley Posted October 19, 2007 Author Report Share Posted October 19, 2007 Hi Gordon, where are you based these days? Almost any of the modern trials bikes will suit you as a begginer, the 250's have more than enough poke. Most people use either Michelin or IRC but remember you will only need a couple or rears a year! It's not like racing where you get through a front and two rears on every bike each time you ride it! You are more than welcome to come down my way for a practice and try out my Scorpa. We will be riding in the Evesham club trial in Saintbury Quarry near Broadway this Sunday signposted from the A44 if you fancy a look. Pete Barnett Blimy, Pete a blast from the past! I'm down near Swindon, so not too far away, I might just come for a look on Sunday, what time does it start? I could do with coming to an event but have trouble finding local ones as an outsider to trials it seems like a friendly but secret society where you get info like "Trial at Johns farm on sunday", which is great if you know Johns farm or who to speak to to find out where it is. Anyway thanks everyone for the advice, I may stretch the budget a little further. And Peter, might see you on the weekend. Gordon Quote Link to comment Share on other sites More sharing options...
scorpa3 Posted October 19, 2007 Report Share Posted October 19, 2007 The Evesham trial at Saintbury starts at 10.30, we will be there until around 1.30 and you are more than welcome to have a ride around at the end on my 250. For the best information on local events look at the regs available page in Trials & Moto Cross News T&MX. The chances are that you will find an event within sensible travelling distance almost every weekend. Trials isn't like road racing where you have to drive hundreds of miles to compete (unless you want to that is!) plus the entry fees are only around Quote Link to comment Share on other sites More sharing options...
lewis_gasgas Posted October 19, 2007 Report Share Posted October 19, 2007 yeah id deffinately get something smaller than the 290 its not about size of engine in trials you can still do the same basically on every bike if you have the ability , and the sherco 290 from my experiences is quite a handfull, also would be better if you could stretch abit more on money you might get something abit better Quote Link to comment Share on other sites More sharing options...
ned1 Posted October 21, 2007 Report Share Posted October 21, 2007 you could probs get an 1998 montesa for Quote Link to comment Share on other sites More sharing options...
airboy808 Posted November 4, 2007 Report Share Posted November 4, 2007 I guess this is more of a question than a suggestion. But what about a Beta Techno 270? Are these a handful or good beginner bikes? Quote Link to comment Share on other sites More sharing options...
slapshot 3 Posted November 4, 2007 Report Share Posted November 4, 2007 I guess this is more of a question than a suggestion.But what about a Beta Techno 270? Are these a handful or good beginner bikes? Big handful 200 or a 250 max Quote Link to comment Share on other sites More sharing options...
manofsteele Posted November 4, 2007 Report Share Posted November 4, 2007 I found a Mont 315 for a grand (2001 model) and have had to spend another Quote Link to comment Share on other sites More sharing options...
steve Posted November 5, 2007 Report Share Posted November 5, 2007 People I've spoken to have said the Mont is a good shout for a first bike (not the lightest, but bulletproof) and curiously, to a man they've all warned me against GasGas... Wouldn't disagree with that. The Montesa is certainly a very well made machine. The Yamaha TY250R is in budget but nowhere near the Montesa in terms of performance - engine, chassis or suspension. They are however very forgiving. The Gas Gas are possibly one of the nicest bike to ride, very good handling, smooth well developed engines with with good power if needed (go for a 250cc) and they are nice and light. The problem is they don't last as well as the Montesa for instance. Parts such as suspension linkage need constant fettling, fork seals and ever frames cracking on older machines. At your budget you are only going to find a tatty one which is false economy, you will end up spending a lot of money on repairing it. The Bultaco you mentioned - do you mean the new era machines which are now Sherco's? If so I would put them in a similar catagory as the Gas Gas. Other makes that might appear an attractive price are best avoided e.g. Aprillia 280/240, early Scorpas with rotax engines, JCM, Fantic K-roo, Quote Link to comment Share on other sites More sharing options...
gordonblackley Posted November 7, 2007 Author Report Share Posted November 7, 2007 Thanks for all the advice, I have just bought a 2004 Sherco 290 for Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.