manofsteele Posted November 12, 2007 Report Share Posted November 12, 2007 Can any of you good fellows tell me how much oil and what grade should go in my 01 315r forks? I'm on the heavy side (15.5 stone), complete novice.... I'm assuming I check the level with the springs out and forks collapsed, is this right? If so, can anyone also tell me the correct level? Cheers Rob Quote Link to comment Share on other sites More sharing options...
315rr Posted November 12, 2007 Report Share Posted November 12, 2007 http://www.apexmotosports.com/content/mont...hnical-info.php Can any of you good fellows tell me how much oil and what grade should go in my 01 315r forks? I'm on the heavy side (15.5 stone), complete novice....I'm assuming I check the level with the springs out and forks collapsed, is this right? If so, can anyone also tell me the correct level? Cheers Rob Quote Link to comment Share on other sites More sharing options...
manofsteele Posted November 13, 2007 Author Report Share Posted November 13, 2007 Fantastic. Thanks for that Quote Link to comment Share on other sites More sharing options...
harry Posted November 27, 2007 Report Share Posted November 27, 2007 http://www.apexmotosports.com/content/mont...hnical-info.php it looks as if Rob already has his answer but how difficult a job is it. Do you have to completely disassemble the forks? Quote Link to comment Share on other sites More sharing options...
manofsteele Posted November 28, 2007 Author Report Share Posted November 28, 2007 I've not actually done the job yet as I've now got two conflicting bits of info.... Obviously, I've got the link that 315rr gave me, but I've also been told summat different by someone I trust completely which suggest an equal amount of oil in both legs, contrary to the link... So, whilst I'm not physically able to do the job at the moment I'm going to keep gathering info. I wonder if equal oil levels is the real world fix and unequal levels as per the link is the factory ideal? Quote Link to comment Share on other sites More sharing options...
eiaprilia Posted November 29, 2007 Report Share Posted November 29, 2007 I've not actually done the job yet as I've now got two conflicting bits of info....Obviously, I've got the link that 315rr gave me, but I've also been told summat different by someone I trust completely which suggest an equal amount of oil in both legs, contrary to the link... So, whilst I'm not physically able to do the job at the moment I'm going to keep gathering info. I wonder if equal oil levels is the real world fix and unequal levels as per the link is the factory ideal? Ok if you look at your fork legs and or stripped them you would find each leg is constructed differently, the right leg has a damping set up only with no spring, the left leg is preload only with spring hence the different oil levels. Most bikes have two legs with the same internals, trials machines don't so your friend is wrong in this case but right for nearly all others. these are the easiest forks i have ever worked on except maybe the ohlins track forks i have on another bike. you do not have to strip them completely to change the oil, i will email anyone one proper instructions if they need them, just let me know. Quote Link to comment Share on other sites More sharing options...
manofsteele Posted November 30, 2007 Author Report Share Posted November 30, 2007 Cheers bud, very kind. I'll take that email ,if I may... pm on its way. I've done a longer, older search since and I've found the same contradictory info in a few posts here. (going back a bit mind). Plus the fella who told me equal levels is actually a trials specialist..... Anyhoo..... I will measure what comes out too, just out of curiosity.. Thanks for the reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.