Jump to content

2000' 290 Oil Change?


hop blip and a jump
 Share

Recommended Posts

 

 

The Sherco oil is drained by removing the sidecase bolt located under the shifter pedal then leaning the bike over approx 45 degrees - you will need to stand the bike up straight after the oil has drained , then lean over again - do this a couple of times to get all the oil out - refill with 450cc good quality NON synthetic.

PS I note you are from Caerphilly - I worked at Allen's of Wales Printing many years ago. are they still there ??( next to the Cheese factory)

Link to comment
Share on other sites

 
 

It is on the left side of the engine (Flywheel side). It is a bolt that does double duty of drain plug and case bolt. This bolt is located at the bottom roughly in the center. On mine the rubber that is between the engine and skid plate is right underneath it.

on edit:

AAAhh I see Mr. Dave got to it before me.

Edited by ZIPPY
Link to comment
Share on other sites

 
 
Hey Caerphilly - Can't remember much about the town as it was in 1967 ( 40 years ago) - I know we had some great nights at the local pubs though. - Oh yes and there is a Castle !!!

40 years ago? i was not even born then

was the castle there that long ago? :D

Link to comment
Share on other sites

 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...