goreboy Posted January 1, 2008 Report Share Posted January 1, 2008 (edited) Help i was gonna fit new fork seals but i dont know how much oil to put back in, anyone out there know? also what grade of oil should i go for? I`ve also noticed thst my rear tyre rubs the silencer is the tyre sizes supposed to be 400-18? Cheers for you help, ps on another note, should i be running this bike on synthetic 2stroke oil or just basic mineral? i`m currently using basic at a ratio of 20:1 is this ok? Edited January 1, 2008 by Goreboy Quote Link to comment Share on other sites More sharing options...
peterb Posted January 2, 2008 Report Share Posted January 2, 2008 Hi Goreboy, Was wandering, are you from Gore NZ?? Go for 280ml each leg, 5 weight. Rear tyre is fine, just push the silencer out of the way a bit, the brackets get bent when falling off. Synthetic or mineral is fine, I use 50:1 mineral 2 stroke oil without problems for many years. 20:1 is way too rich. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
goreboy Posted January 3, 2008 Author Report Share Posted January 3, 2008 Cheers for the info, i thought 50:1 was only for synthetic and it has to be ricer for mineral based oils, Nah i`m not from gore nz, but i get asked that quite a lot, i plan to go there one day and have my photo taken with the road sign, lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.