txt270gasgas Posted January 18, 2008 Report Share Posted January 18, 2008 (edited) There seems to be more than one plug underneath the sump guard which one should i use to drain the gear oil, the one nearest to the rear wheel or the one nearest to the front wheel. the bike is 98 TXT Cheers Jos Edited January 18, 2008 by txt270gasgas Quote Link to comment Share on other sites More sharing options...
jockster Posted January 18, 2008 Report Share Posted January 18, 2008 use the one nearest the rear wheel Quote Link to comment Share on other sites More sharing options...
txt270gasgas Posted January 18, 2008 Author Report Share Posted January 18, 2008 Ok, done that. now wheres the top up plug !!! Quote Link to comment Share on other sites More sharing options...
peterb Posted January 18, 2008 Report Share Posted January 18, 2008 Oil fill is on the clutch case, below the kickstart. Refill 700ml 10 weight mineral or an ATF rated to Dexron III. The other drain plug, closer to the front wheel is for draining water from the crankcase, should you ever drown your bike. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
txt270gasgas Posted January 18, 2008 Author Report Share Posted January 18, 2008 Is it on the top or on the side, sorry, to be pain, need to get a manual or book or somthing Quote Link to comment Share on other sites More sharing options...
txt270gasgas Posted January 18, 2008 Author Report Share Posted January 18, 2008 Is it the glass window , do i put the bike on the side Quote Link to comment Share on other sites More sharing options...
peterb Posted January 19, 2008 Report Share Posted January 19, 2008 It's easiest to lay the bike down on the left, remove the sight glass, either a 17 or 19 mm socket, and re-fill. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
txt270gasgas Posted January 19, 2008 Author Report Share Posted January 19, 2008 Thansk a lot mate i owe you a drink. Just found this an was wondering how the hell you get 700ml in a 5mm whole. Looks like i'll get that ride in tommorow after all Cheers Bud !! Quote Link to comment Share on other sites More sharing options...
peterb Posted January 19, 2008 Report Share Posted January 19, 2008 Can't remember if your bike is a 98 or a 99, if 99 then there is a fill plug at the top of the clutch case so you didn't need to lay the bike over for filling. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
peterb Posted January 19, 2008 Report Share Posted January 19, 2008 For filling, I use an old Castrol oil bottle with a plastic tube extension, measure out the quantity and fill into the Castrol bottle then squeeze it in. Bit too far to go to buy me a drink, but thanks anyway. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.