Jump to content

How Much Transmission Oil In 02 290


txt270gasgas
 Share

Recommended Posts

 

450ml I think.

As you sit on the bike, there will be a an allen bolt low down on the left which will drain.

On the side, there is another 'flush with the casing' allen bolt with a fat head, which is where you fill.

Actually, you'll probably find the info' with much better explanations ;) here:

http://www.sherco.com/wayne_corner.html

Edited by dibdab
Link to comment
Share on other sites

 
How much transmission oil in 02 290 ?

Is it the same oil as a gas gas ?

and where do you fill and drain the oil ?

any info much appreciated

As dibdab mentionned, 450ml is the correct quantity.

The oil you were using in your GG transmission should work fine. Both GG and Sherco recommend SAE 10w40 oil but many riders run thinner oil such as 5w30 or even ATF transmission oil.

Take note that all the basic maintenance info can be found on the one-page manual for you bike.

From the www.sherco.com website, go to Support and than Manuals or follow directly this link:

http://www.sherco.com/downloads/service/02_manual.pdf

Hugo

Link to comment
Share on other sites

 
 
hi would the same amount of oil in a year 2000 250 cheers guys!

For sure the oil qty for a 250 vs a 290 is the same. For this specific year (2000), I have never seen any documentation but since all other years are 450ml and that the base of the 2000 looks very similar, I doubt the required qty would be anything different.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...