skid Posted January 25, 2008 Report Share Posted January 25, 2008 (edited) 03 beta 200 I'm doing my 1st ever fork oil change on this bike. When refilling with oil, the manual says spring should be installed. It also shows a pic with a 120 mm air gap for the oil height. With the spring in but the fork compressed the spring sticks out. Am I suppose to lift the outer fork tube just high enough to get that 120 mm?? I haven't gotten into the cartridge side yet .. any pointer on that?? Edited January 25, 2008 by Skid Quote Link to comment Share on other sites More sharing options...
paul w Posted January 25, 2008 Report Share Posted January 25, 2008 skid, i have put a link onto the beta uk site that has the details for fork oil replacement. http://www.betatrialuk.com/content/view/68/51/ hope this helps, paul. Quote Link to comment Share on other sites More sharing options...
mikee Posted January 25, 2008 Report Share Posted January 25, 2008 Fork Oil - LEFT Take out the spring. Fork fully compressed, 120mm air gap at top of fork... RIGHT Fork fully compressed, 60mm air gap at top of fork... on the right leg its good to work the damper a bit so you get the right amount.... Quote Link to comment Share on other sites More sharing options...
skid Posted January 25, 2008 Author Report Share Posted January 25, 2008 Thanks for the replies Whoever did the translation in the manual most of lost something in the translation!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.