Jump to content

Front Fork Adjustments On 2.9 '04?


hugo
 Share

Recommended Posts

I've recently purchased a 2.9 2004. Love it so far...

I was surprised to see those blue caps on top of the fork tubes are effectively just... caps. I thought that the fork would have compression and extension adjustment as my older trials had but nope... Then by reading the companion maintenance poster I learned thoses caps should be unscrewed every 5 hours of riding to relieve the air pressure.

What is the concept behind that? The fork compresses air and once in a while you must "reset" it ? Are there any suspension adjusters that I don't see ?

Edited by hugo
Link to comment
Share on other sites

 

 
 
 

yOU CAN ALSO UES THE CAPS TO MAKE ADJUSTMENTS TO RIDE HEIGHT. IF YOU OPEN THE VALVES AND COMPRESS THE FRONT END BEFORE LOCKING THEM DOWN THE FRONT WILL SIT A BIT LOWER WHICH DECREASES THE RAKE AND MAKES THE BIKE TURN A BIT SHARPER IN TIGHT SECTIONS. THATS THE THEORY ANYWAY. bE SURE THEY ARE TIGHT ENOUGH THAT THEY DON'T LEAK!

oOOOPS! cAPS oN! :hyper:

Link to comment
Share on other sites

 
Where does the air come from?

I assume that fork seals are made in such a way that they seal better in one direction than the other so they'll keep stuff (oil) in.

My guess is that when they extend, they suck a bit of air past the seal, and the seal holds it in.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...