Jump to content

sherpa 250 and 350


sherpaboy
 Share

Recommended Posts

i have a 1979 sherpa t 250 with a a duff flywheel and stator plate i have seen the bottom half of a sherpa 350 engine for sale but only know its from the seventies a was wondering if anyone could help me i am hoping that the whole ignition system (stator plate coils etc ) will fit straight on to my bike with my system removed.

any help most welcome

cheers richie

Link to comment
Share on other sites

 

The stator plate and coils will fit straight onto your 250 and are identical.

The flywheel on the 350 however is much heavier - but will fit - give you more low down torque - but you will loose a little response - if you can - use the 250 flywheel it will be better - but you can get away with 350 one if you have to.

Link to comment
Share on other sites

 

I think from 73 onwards they are pretty much the same.

Mail Dave Renham at Bultaco uk ,he will tell you.

Do you really need to buy a whole bottom end just for the ignition bits you need?

Again try Dave at Bultaco,the stator may be duff on the bottom end you are looking at.A rewound stator will give you a much better spark.

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...