dirtrider6 Posted April 4, 2008 Report Share Posted April 4, 2008 1993 Beta Synt 260 Runs very rich, I clean it out and it's a very strong runner, but shut it off, or ride slow and it loads back up. Mikuni carb 135 Main EJ5CD needle on second clip Air screw 2 turns out BP7ES Spark plug Very hard to see any numbers on the pilot jet, OE 05? but the holes in the pilot are HUGE compared to my dirt bike. Previous owner said it does not like the cold weather, I had it out on a much nicer day and I cant remember it loading up like it is now (48 deg.) Is there an outlet for getting jets for this bike, in case I need smaller jets? Thanks Chuck Quote Link to comment Share on other sites More sharing options...
dirtrider6 Posted April 5, 2008 Author Report Share Posted April 5, 2008 OK I was riding today, same thing, ran like crap, going downhill it would stall, when I got stuck on a uphill it was revving, what the heck? Now I knew something was up! I started thinking about changes I made recently, then I pushed down on the choke, the idle picked up, hum, pushed it again, same thing, I got it! 2 weeks ago Mick had a zip tie around his choke on his Sherco to make it easier to get at, well I put one around mine to, it worked, but now it wasn't letting the choke fully disengage! Once I took it off, the bike ran great! Can you say SQUID! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.